Product Details
Overview
EPON ONT HGU FHR1201KB is developed for the broadband access market
based on EPON technology to meet the needs of broadcasting and
Telecom operators for broadband access and FTTH fiber-to-the-home.
Together with EPON OLT central office products and EMS network
management system, it provides users with complete EPON based FTTH
solutions. It meets the requirements of IEEE802.3ah and China
Telecom EPON equipment technical requirements specification, and
has good compatibility with the mainstream manufacturer's central
office OLT. The device supports the up-link and down-link symmetric
1Gbps transmission rate, providing users with good QOS guarantee
and flexible bandwidth allocation. Ethernet business and IP
integrated services. Integrated wireless function, fully compliant
with 802.11 n/b/g wireless standard protocol, built-in high-gain
directional antenna, wireless transmission rate up to 300Mbps, with
strong penetrating power and wide coverage, providing users with
more efficient data transmission guarantee.
Characteristics
- Plug and play, integrate auto detection, auto configuration and
auto firmware upgrading;
- Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD
multicast monitoring function;
- Support diagnostic monitoring and remote disabling of fiber
optical;
- Support 802.11n Wi-Fi(T/R)function;
- Support NAT and firewall function;
- WAN support networking bridge, route and bridge/route mixed mode;
- Full speed 1G non-blocking switching
- 2048 MAC address table
- Support VLAN, transparent, tag, translation, trunk, etc.
- Integrated port monitoring, port mirroring, port rate limiting,
port SLA, etc
- Integrated IEEE802.1p QoS with four level priority queues
- Support IPv4/ IPv6 IGMP snooping and MLD snooping
- Support bridge, route and bridge/route mixed mode
Specification
Technical Items | Descriptions |
Dimension | 130*107*31mm(length*width*height) |
Net weight | ≤0.2Kg |
Fiber port | 1 EPON interface, SC single-mode/single-fiber, Downstream rate 1.25Gbps, Upstream rate 1.25Gbps |
Wavelength | Tx 1310nm, Rx 1490nm |
Fiber interface | SC/PC |
RX sensitivity | <-27dBm (1490nm) |
WLAN | IEEE802.11b/g/n,300Mbps, a built-in antenna |
LAN | 1*10/100/1000Mbps+1*10/100Mbp adaptive Ethernet ports, full/half
duplex, RJ45 interface |
Throughput | Throughput can reach 900Mbps or more |
DC power | 12V 1A, external AC-DC power adapter |
Button | Reset, power, WIFI |
Power | ≤10W |
Operation | Working temperature: -5〜+55℃ working
humidity:10〜90%(non-condensation) |
Storage | Storage temperature: -30℃〜+60℃ storage humidity:
10〜90%(non-condensation) |
Company Profile
Dawnergy is an ISO qualified fiber optic solution provider. With
solid production capacity, leading R&D strength and strong
customization capabilities in the industry, we have supplied fiber
optic products to over 65 countries around the world.
Our main products are: Fiber Optic Cables, Fiber Optical
Splitters,Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber
Distribution Boxes, Fiber Optic Sockets,Optical Distribution
Cabinets/Hubs,Outdoor Telecom Cabinets, Optical Distribution
Frames,Network Rack cabinets, etc. Domestically, our shareholders
have a large market share in the centralized procurement of China
Telecom, China Mobile, China Unicom and China Tower. At the same
time, we are also a qualified supplier for major internationally
renowned equipment manufacturers and fiber optic cable
manufacturers. Our products are also widely used in special
networks such as radio broadcast, television, electric power and
military.
Specifically in the international market, through direct supply,
partnering with local distributors, or cooperating with
internationally renowned communication solution providers, our
products have been widely used in the FTTH networks of the
following operators: TELEFONICA, TIM , STC, BSNL, TOT, CAT, PLDT,
TELKOM INDONESIA, TM, NEPAL TELECOM, AIRTEL, etc.