Product Details
Overview
FHR2100GZB GPON ONT is developed for the broadband access market
based on GPON technology to meet the needs of Telecom operators for
broadband access and FTTH. Together with OLT central office
products and EMS network management system, it provides users with
complete GPON based FTTH solutions. It is fully compliant with
technical regulations such as ITU-T G.984.x and technical
requirement of GPON Equipment (V2.1 and above version) technical
requirements specification. The device supports the up-link and
down-link symmetric 1Gbps transmission rate, providing users with
good QOS guarantee and flexible bandwidth allocation. Efficient
bandwidth utilization and Ethernet service support capabilities
help operators deliver reliable service quality assurance to their
customers.
Characteristics
- Plug and play, integrate auto detection, auto configuration and
auto firmware upgrading;
- Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD
multicast monitoring function;
- Support diagnostic monitoring and remote disabling of fiber
optical;
- Support 802.11n Wi-Fi(T/R)function;
- Support NAT and firewall function;
- WAN support networking bridge, route and bridge/route mixed mode;
- Full speed 1G non-blocking switching
- 2048 MAC address table
- Support VLAN, transparent, tag, translation, trunk, etc.
- Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
- Integrated IEEE802.1p QoS with four level priority queues
- Support IPv4/ IPv6 IGMP snooping and MLD snooping
- Support bridge, route and bridge/route mixed mode
Specification
Technical items | Descriptions |
Dimension | 100*65*20mm(length*width*height) |
Net weight | ≤0.1Kg |
Fiber port | 1 GPON interface, SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
Wavelength | Tx 1310nm, Rx 1490nm |
Fiber interface | SC/PC |
RX sensitivity | <-28dBm (1490nm) |
LAN | 1*10/100/1000Mbps adaptive Ethernet ports, full/half duplex, RJ45
interface |
Throughput | Throughput can reach 900Mbps or more |
DC power | 5V 1A, external AC-DC power adapter |
Button | Reset, power |
Power | ≤8W |
Operation | Working temperature: -5〜+55℃ working
humidity:10〜90%(non-condensation) |
Storage | Storage temperature: -30℃〜+60℃ storage humidity:
10〜90%(non-condensation) |
Company Profile
Dawnergy is an ISO qualified fiber optic solution provider. With
solid production capacity, leading R&D strength and strong
customization capabilities in the industry, we have supplied fiber
optic products to over 65 countries around the world.
Our main products are: Fiber Optic Cables, Fiber Optical
Splitters,Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber
Distribution Boxes, Fiber Optic Sockets,Optical Distribution
Cabinets/Hubs,Outdoor Telecom Cabinets, Optical Distribution
Frames,Network Rack cabinets, etc. Domestically, our shareholders
have a large market share in the centralized procurement of China
Telecom, China Mobile, China Unicom and China Tower. At the same
time, we are also a qualified supplier for major internationally
renowned equipment manufacturers and fiber optic cable
manufacturers. Our products are also widely used in special
networks such as radio broadcast, television, electric power and
military.
Specifically in the international market, through direct supply,
partnering with local distributors, or cooperating with
internationally renowned communication solution providers, our
products have been widely used in the FTTH networks of the
following operators: TELEFONICA, TIM , STC, BSNL, TOT, CAT, PLDT,
TELKOM INDONESIA, TM, NEPAL TELECOM, AIRTEL, etc.