Product Details
Overview
FHR2100SGZ GPON ONT is is designed for FTTH and networking service
providers based on the Gigabit GPON technology, has a high cost
performance, it supports the 802.11n wireless networking technology
(T/R). And It is fully compliant with technical regulations such as
ITU-T G.984.x and technical requirement of GPON Equipment (V2.1 and
above version) from China Telecom, China Unicom.It is support the
CATV signal, It is high-reliable and easy to maintain, support
multiple QoS service guarantees.
Characteristics
- Plug and play, integrate auto detection, auto configuration and
auto firmware upgrading;
- Support diagnostic monitoring and remote disabling of fiber
optical;
- Full speed 1G non-blocking switching;
- 2048 MAC address table;
- Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
- Support auto polarity detection of Ethernet ports (AUTO MDIX);
- Integrated IEEE802.1p QoS with four level priority queues;
- Supports mixed network with mainstream OLT to minimize operators'
network construction costs;
- With the industry's most advanced technology, it has powerful
functions and QoS guarantees in Ethernet services;
- Desktop devices take up less space and consume less power;
- Support Single Fiber CATV optionalSupport flexible QinQ VLAN,DHCP
server/relay and IGMP/ MLD multicast monitoring function;
Specification
Technical items | Descriptions |
Dimension | 100*65*20mm(length*width*height) |
Net weight | ≤0.1Kg |
Main service | 1GE + CATV |
Fiber port | 1 GPON interface, SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
Wavelength | Tx 1310nm, Rx 1490nm,RF1550nm |
Fiber interface | SC/PC |
RX sensitivity | <-28dBm (1490nm) |
LAN | 1*10/100/1000Mbps adaptive Ethernet ports, full/half duplex, RJ45
interface |
Throughput | Throughput can reach 900Mbps or more |
DC power | 5V 1A, external AC-DC power adapter |
Button | Reset, power |
Power | ≤8W |
Operation | Working temperature: -5〜+55℃ working
humidity:10〜90%(non-condensation) |
Storage | Storage temperature: -30℃〜+60℃ storage humidity:
10〜90%(non-condensation) |
CATV Function
Technical Items | Descriptions |
Optical Receive | dBm | -15 ~ +2 |
AGC range | dBm | -8~+2 |
Fiber return loss | dB | >50 |
wave length | nm | 1100 ~ 1600 |
Connector | SC/APC |
C/N | dB | ≥ 50 |
C/CTB | dB | ≥ 62 |
C/CSO | dB | ≥ 61 |
BW | MHz | 40~ 1000 |
Output level | dBμV | ≥ 82 |
Company Profile
Dawnergy is an ISO qualified fiber optic solution provider. With
solid production capacity, leading R&D strength and strong
customization capabilities in the industry, we have supplied fiber
optic products to over 65 countries around the world.
Our main products are: Fiber Optic Cables, Fiber Optical
Splitters,Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber
Distribution Boxes, Fiber Optic Sockets,Optical Distribution
Cabinets/Hubs,Outdoor Telecom Cabinets, Optical Distribution
Frames,Network Rack cabinets, etc. Domestically, our shareholders
have a large market share in the centralized procurement of China
Telecom, China Mobile, China Unicom and China Tower. At the same
time, we are also a qualified supplier for major internationally
renowned equipment manufacturers and fiber optic cable
manufacturers. Our products are also widely used in special
networks such as radio broadcast, television, electric power and
military.
Specifically in the international market, through direct supply,
partnering with local distributors, or cooperating with
internationally renowned communication solution providers, our
products have been widely used in the FTTH networks of the
following operators: TELEFONICA, TIM , STC, BSNL, TOT, CAT, PLDT,
TELKOM INDONESIA, TM, NEPAL TELECOM, AIRTEL, etc.