Temperature Performance Permanent Ferrite Magnets for Automotive Starting Motors

Permanent Ferrite Magnets That Provide High-Temperature Resistance Performance In Automotive Starting Motors

PHYSICAL PROPERTIES OF SINTERED FERRITE MAGNETS

What's the key advantages of ceramic strontium ferrite magnets made by wet compression molding?

• Low cost - Strontium ferrite is inexpensive and the wet molding process is relatively simple. This makes them cheaper than rare-earth magnets.

• High magnetic property-Even without heavy rare earth element additions, strontium ferrite magnets can achieve coercivities of 700-1000 kA/m, making them suitable for many applications.

• Dimensional consistency - The compression molding process allows for close dimensional tolerances and uniform magnet shapes to be produced consistently.

• Temperature stability - Strontium ferrite magnets have high Curie temperatures, typically around 450-470°C. They maintain good magnetic properties over a wide operating temperature range.

• Resistance to corrosion - Being fully dense ceramic materials, they are not prone to corrosion like bonded magnets containing additives

Application in electric power steering (EPS) system:

In electric power steering systems, the magnetic properties of permanent magnet ferrite are widely used in the design of motors and sensors:

Motor design: Permanent magnet motor is often used in electric power steering system, permanent magnet ferrite as the permanent magnet of the motor, which can provide continuous magnetic field, thereby improving the efficiency and response speed of the motor. Compared with traditional motors, permanent magnet motors have higher power density and can achieve greater output power in a smaller volume.

Sensor application: In the steering system, the accurate detection of Angle, torque and other parameters is very important. The permanent magnet ferrite can be used in conjunction with the Hall effect sensor to accurately feedback the steering state through its magnetic field changes to ensure the safety and handling sense of the vehicle.

What's the application of Xinheng's permanent ferrite magnets?

Xinheng mainly manufactures the following types of ceramic arc segment magnets:

• Automotive motor magnet including automobile starter motor magnet, automobile wiper motor magnet, automobile rolling window motor magnet, automobile heating and cooling fan motor magnet, automobile seat motor magnet, automobile sunroof motor magnet, automobile powsteering motor magnet, automobile tailgate motor magnet, automobile oil pump motor magnet, automobile ABS anti-lock motor magnet, etc.
• Inverter home appliance magnet including inverter washing machine motor magnet, inverter refrigerator motor magnet, inverter air-conditioner motor magnet,etc.
• Fan motor magnet including ceiling fan motor magnet, floor fan magnet, etc.
• Motorcycle motor magnet including motorcycle starter motor magnet, motorcycle flywheel magneto magnet, etc.

How Xinheng fabricates its permanent strontium ferrite magnet?

FERRITE POWDER GRADE OF MOTORCYCLE MOTORS MAGNET

Introduction Of automobile wiper motor:

Permanent magnet ferrite plays a key role in automobile wiper motor. It is commonly used as an excitation source for a motor, helping the motor generate the desired torque by generating a constant magnetic field. This material has a high permeability and coercivity, making it particularly suitable as an auxiliary electromagnetic field source. Since the wiper motor needs to operate in a variety of harsh environmental conditions, the stability and durability of permanent magnet ferrite also makes it an ideal choice. Therefore, permanent magnet ferrite in automotive wiper motor can ensure the efficient operation of the motor and improve its reliability.

To know more about Xinheng Magnets

Sichuan Xinheng Magnetic Materials Co., Ltd is located in Mianzhu City, Sichuan Province, which has been known as " the leader of ancient Shu and the important town of Yizhou " since ancient times.
The company was founded in May 2008. It was formerly the designated magnetic material production enterprise of the Ministry of Electronic Industry in Aba Prefecture, Sichuan Province. After decades of accumulation in the magnetic materials industry, the company has developed into a national high-tech enterprise integrating the design, development, production and sales of permanent magnet ferrites. Our factory covers an area of 14,000 square meters, has an annual production capacity of 8,000 tons, and has more than 350 employees.
The company owns China's first independently developed servo fully automatic wet hydraulic press and China's first double-layer roller kiln.It has the ability to independently design, develop and process various types of tools and molds.
The company's main product is sintered ferrite permanent magnet. The product range covers automobile motors, motorcycle motors, universal mechanical motors, household appliance motors, household fan motors, variable inverter motors, water pump motors, etc. The products are widely used in automobiles and motorcycles, office equipment, electric tools, household appliances, fitness equipment and other fields.
The company's products are mainly sold to motor manufacturers in Europe, America, South Asia, Taiwan, southwest China, East China, and South China.
The company adheres to the business tenet of "quality assurance, professional service, and customer satisfaction". Its business philosophy is to improve the level of operation and management, to imporove the quality of employees, reduce production costs, and improve the market competitiveness of enterprises. It adheres to the development philosophy of putting people first, making high-quality products with heart, seeking development through innovation, and building brands with integrity. We are willing to create a win-win relationship and grow together with our customers!