

Add to Cart
Product Model | HFD-8 |
Freeze-dried area | 1 M2 |
Processing capacity | 10-12 kg/batch |
Tray quantity | 8pcs |
Tray size(mm) | 265*435*25 |
Spacing between partitions | 40mm |
Power(W) | 2500 |
Ultimate vacuum | 15Pa |
Cold trap temperature | ≤-40ºC |
Temperature probe | independent probe |
Compressor | French Danfoss brand |
Frame | Iron frame + Plastic spraying |
Installation step
(1)Open the package, check the components according to the packing
list;
(2)Fill the pump’s oil into pump to the middle of the level guide.
Remark: Please using required oil type;
(3)Connect the pipe between pump and dryer by connectors. One side
is fixed on pump’s air inlet, the other side is fixed on dryer’s
vacuum outlet;
(4)Connect the pump’s power plug into dryer’s vacuum pump power
outlet;
(5)Connect the power wire to dryer’s main power outlet, other side
connect to power supply(with ground wire );
(6)Turn on the switch, test step by step according to the
instructions. When all the technical data are satisfy (including
vacuum <15Pa, condenser chamber’s temperature <-35℃), the
dryer could be put into usage.