Anti Corrosion Rotary Vane Vacuum Pump Lab 220V High Temperature

Lab High Temperature Anti Corrosion Rotary Vane Vacuum Pump

Rotary Vane Vacuum Pump Description

2XZ-4 rotary vane vacuum pump is double stage high speed oil sealed rotary vane vacuum pump (in the following called “the pump” for short). Its pumping principle is as same as that of 2X type pump .Rotors are eccentrically mounted within the cylindrical housing of the stators and vanes are fitted freely inside the respective slots of the rotor. When the rotor rotates at high speed, vanes in the rotor slot are urged outwards by centrifugal force as well as by spring force so as to keep close contact at their tips with the stator wall throughout rotation.

Rotary Vane Vacuum Pump Specification

Rotary Vane Vacuum Pump Introduction

Thus the inlet port and outlet port on the stator are separated by them. The volume of the space leading to the inlet port expands progressively and periodically with gas filling the space through inlet pipe, meanwhile the volume of the space leading to the outlet port diminishes progressively and periodically to compress the gas previously sucked .By means of gas pressure and oil pressure exhaust valve on the outlet port is opened to expel gas out of the pump through the valve, then vacuum is obtained at the intake side of the pump.

Double stage pump is the arrangement of two single stage pumps in series .When the intake pressure is higher, both stages of the pump may exhaust simultaneously, while at lower suction pressure gas is first expelled out from first stage to second stage ,then from second stage exhausts to the open air.

2XZ-4 type pump is equipped with gas-ballast valve. Its function is to fill the exhaust space with certain amount of air ,when the valve is open ,so to reduce the proportion of the partial pressure of vapor in the total discharge pressure .As the partial pressure of vapor is lower than that of the saturated vapor pressure corresponding to the working temperature of the pump, vapor can be discharged from the pump with the filled air in order to avoid condensation of vapor in the pump oil and to prevent oil from emulsifying by the condensed vapor so as to prolong the useful lift of oil. However the ultimate vacuum of the pump shall drop ,and the temperature of the pump shall rise when the gas-ballast valve is open.

2XZ-4 type pump has the outstanding achievements of small size, less weigh ,quiet operation and easy to start .Besides devices to prevent from sucking back of oil and leakage of oil from axle sealing to contaminate environment are also provided.

Rotary Vane Vacuum Pump Application

1. The pump is one of the basic equipment to exhaust a sealed vessel. It can be used either independently as main and can also be served as for pump for booster pump diffusion pump and molecular pump or as holding pump for a vacuum system and as a pre-pumping for different kinds of the pumps. So that is can be applied in electro-vacuum industries, vacuum flask manufacturing, vacuum welding and as an accessory to those fine gauges or meters where vacuum is required .It is more suitable for laboratory use because of its small size ,less weight and quiet operation.

2.The pump is allowed to work continuously for many hours at a stretch under atmospheric temperature of 5℃-40℃ and intake pressure below 1230pa.While the pumped gas containing moisture of a relative humidity of more than 90% gas-ballast valve should be open.

3. Whit the inlet port widely opened to atmosphere the pump is not allowed to work more than one minute.

4.The pump is not suitable for pumping over-oxidized, poison, explosive and corrosive gas as well as gases which react chemically with the pump oil contain particles of dust.

Henan Lanphan Industrial Co., Ltd. integrates industry and trade.

The company has advanced production equipment, excellent workforce, stable domestic and foreign partners.

The company has a number of outstanding employees with a bachelor's degree or above and a TEM-8 English major. The company's after-sales personnel have overseas master's degrees. Professional technical personnel provide strong backing for the company.

Henan Lanphan Industrial Co., Ltd. currently mainly sells two categories of products:

Scientific research instruments: rotary evaporator, glass reactor, vacuum pump, drying oven, magnetic stirrer, heating jacket, short-path distillation, centrifuge, falling film evaporator, molecular distillation equipment, etc.;

Piping equipment: rubber joints, metal joints, air duct joints, etc.;

Henan Lanphan Industrial Co., Ltd. occupies a leading position in the industry with high-quality products and reasonable prices. Products are exported to more than 100 countries and regions, with customers all over the world, and have won the trust of domestic and foreign customers with a good reputation.

The company adheres to the concept of "people-oriented", respects customers, employees, partners, suppliers and social groups; takes integrity as the purpose of the company's development, "honesty" is the foundation, and "trust" is used; the pursuit of excellence and continuous innovation.