Microwave PCB On TC600 With Blue Solder Mask And Immersion Silver On Pads

Today, we will be discussing the TC600 microwave PCB, which is a type of enhanced thermal conductivity printed circuit board.

Rogers TC600 laminate is a woven fiberglass reinforced, ceramic-filled, PTFE-based composite designed to provide enhanced heat transfer through high thermal conductivity, while reducing dielectric and insertion losses. The increased thermal conductivity offers several advantages, including higher power handling, improved device reliability, and reduced hot spots.

Let's take a closer look at the properties of TC600 material, including its electrical, thermal, mechanical, and physical characteristics.

TC600 Typical Properties:

1. Dielectric Constant: The dielectric constant of TC600 is 6.15 at 1.8 MHz using the resonant cavity method. It is also 6.15 at 10 GHz according to IPC TM-650 testing.

2. Dissipation Factor: The dissipation factor is 0.0017 at 1.8 GHz and 0.002 at 10 GHz, as per IPC TM-650 testing.

3. Temperature Coefficient of Dielectric Constant (TCDk): The TCDk is 75 ppm/ºC, indicating that the dielectric constant of TC600 remains stable over a wide temperature range.

4. Electrical Properties: TC600 exhibits good volume resistivity and surface resistivity, with an electrical strength of 850 Volts/mil or 34 Kv/mm. The dielectric breakdown is 62 kilovolts, and the arc resistance is greater than 240 seconds.

5. Thermal Properties: TC600 has a decomposition temperature greater than 512 °C. The T260, T288, and T300 values are all greater than 60 minutes, indicating excellent thermal stability. It also has a low Z-Direction coefficient of thermal expansion (CTE), providing reliable plated through hole performance.

6. Mechanical Properties: TC600 demonstrates a peel strength of 10 lb/in, a Young's modulus of 280 kpsi, a flexural strength of 9.6 kpsi, and a tensile strength of 5.0 kpsi.

7. Physical Properties: TC600 has extremely low water absorption of 0.02%, a density of 2.9 g/cm³, and a high thermal conductivity of 1.1 W/mK in the Z direction. It has a specific heat capacity of 0.94 J/gK and a flammability rating of 94V0.

8. Outgassing: TC600 exhibits a total mass loss of as low as 0.02%, indicating excellent outgassing properties.

PCB Capability (TC600):

We offer various layer counts, including single-sided, double-sided, multilayer, and hybrid PCBs. The dielectric thickness options include 10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm), and 60mil (1.524mm) to cater to different design requirements.

Our PCBs are available with copper weights of 1oz (35µm) and 2oz (70µm), providing flexibility for specific applications.

The maximum size for our PCBs is ≤400mm X 500mm, accommodating a wide range of applications.

We offer a variety of solder mask colors, including green, black, blue, yellow, red, and more.

Additionally, our surface finish options include immersion gold, hot air solder level (HASL), immersion silver, immersion tin, bare copper, OSP, pure gold plated, and others, allowing for various choices for the final finish of the PCB.

Conclusion:

TC600 printed circuit boards (PCBs) are designed to deliver improved thermal management, making them ideal for high-power RF signal applications.

With high thermal conductivity, low loss tangent, low coefficient of thermal expansion (CTE), and temperature phase stability, TC600 boards offer enhanced performance and reliability in high-power applications.

They are suitable for power amplifiers, couplers, filters, small footprint antennas, digital audio broadcasting (DAB) antennas, GPS, and handheld RFID reader antennas, among others.

Thank you. We hope this information was helpful, and we look forward to seeing you again next time.

Company Profile

Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipment, radar systems, digital radio frequency antenna and other fields worldwide for 18 years. Our high frequency PCBs are mainly built on 3 high frequency material brands: Rogers Corporation, Taconic and Wangling. Dielectric constant ranges from 2.2 to 10.2 etc.

Bicheng PCB is headquartered in Shenzhen, a city with great economic vitality. Based in China, we adhere to the philosophy of servicing small and medium sized companies offering variety of circuit boards to meet the demands of market.

Main Business & PCB Applications

We maintain the highest standards which support products that exhibit exceptional quality, performance and reliability. We also have divisions of FR-4 circuit board, flexible circuits and metal core PCBs featured as prototypes, small runs to mass production. We actively research and build such high value added PCB projects as HDI, quick turn, impedance control, heavy copper and backplane board etc. This has made our PCB products generate an effective prolongation and complementation, as well as formation of integrated products line ranging from low-end to high-end.The circuit boards are used in the industries of home appliances, portable and consumable electronics, medical filed, aerospace as well as telecommunications etc.

Main Material Partners