Ø56 mm Loop 3-Paddle Manual Fiber Polarization Controllers

Manual Fiber Polarization Controllers

3-Paddle Polarization Controllers

Description

Our 3-Paddle Fiber Polarization Controllers use stress-induced birefringence to create independent wave plates to alter the polarization of the transmitted light in single-mode fiber. The three fractional wave plates are created by looping the fiber around three independent spools. For the polarization controllers preloaded with fiber, the three paddles are configured to approximate a quarter-wave, half-wave, and quarter-wave plate, in that order, when used at the design wavelength.

The MFPC-56 fiber polarization controller is empty, allowing customers to insert single-mode fiber with a Ø900 µm jacket. Additionally, we have Ø900 µm jacketed FC/PC and FC/APC patch cables available from stock that are suitable for use with these controllers. To ensure proper usage of the controllers, fiber cables must be long enough to achieve the recommended number of loops. For fibers with higher bend loss, we recommend using our Ø56 mm polarization controllers, thereby causing the least amount of bending.

The fiber is secured around three spools and by a clamp at each end of the controller. The spool covers have knobs for easy loading and unloading and the clamps are held in place by 4-40 (M3) screws. If needed, the top of the clamps can be completely removed to load terminated fibers. To secure the controller to the optical table, all 3-paddle controllers have three additional long slots along their base for mounting options to both metric and imperial optical tables. Three slots at the base accept 1/4"-20 (M6) cap screws.

Features

• 3 Paddles Provide 3 Independently Rotatable Wave Plates
• Ø2.2" (56 mm) Fiber Loops
• Each Paddle Provides ±117.5° of Rotation
• Available Empty or Preloaded With FC/PC- or FC/APC-Terminated Fiber
• Replacement Ø900 µm Jacketed FC/PC or FC/APC Patch Cables Available

Specifications

1. Retardance varies as a function of wavelength
2. Devices with preloaded fiber are configured to approximate quarter-wave, half-wave, and quarter-wave plates when used at this wavelength
3. Total fiber length is the total length of pre-loaded fiber inside and outside the controller
4. Fiber lead length refers to the length of fiber protruding from the device on either side of the controller
5. All connectors are 2.0 mm narrow key

Order Information

Manual Fiber Polarization Controllers

Simplex Single Mode Fiber Optic Patch Cable

1. Connector Brand

2. Connector End A-Connector End B type

3. Fiber Type

4. Tubing type

5. Cable Length

Sample:

Model No.: AFC-R-780HP-5

Simplex Single-Mode Fiber Optic Patch Cable,

SENKO Connector, FC/APC-FC/APC,

Nufern/Coherent 780HP,

Ø0.9mm Yellow Hytrel Furcation Tubing,

5 Meters

Model No.: AFC-Q-HI1060-5

Simplex Single-Mode Fiber Optic Patch Cable,

SENKO Connector, FC/APC-FC/APC,

Corning HI1060,

Ø0.9mm Yellow Tight Buffer,

5 Meters

Model No.: UFC-Q-SMF28-5

Simplex Single-Mode Fiber Optic Patch Cable,

SENKO Connector, FC/UPC-FC/UPC,

Corning SMF-28 Ultra,

Ø0.9mm Yellow Tight Buffer,

5 Meters

Model No.: AFC-Q-SMF28-5

Simplex Single-Mode Fiber Optic Patch Cable,

SENKO Connector, FC/APC-FC/APC,

Corning SMF-28 Ultra,

Ø0.9mm Yellow Tight Buffer,

5 Meters

Shanghai Yogel Communication Equipment Co., Ltd. is a professional company engaged in passive optical network (PON) products, fusion splicers&accessories and fiber optic testing & maintaining tools.

We provide manufacturing, sales and services of patch cords, pigtalis, water-proof cable assemblies, fast connectors, fiber couplers or splitters, WDMs, optical adapters, fiber distribution or terminal boxes, ODF, splice closures, outside plants, indoor or outdoor fiber optic cables, FTTH drop cables, and fiber optic blowing products, including microducts, tuble bundles, microduct closures and connector accessories. Based on competitive prices, high-quality products and innovative technology, we stand apart from the rest in domestic FTTx, and cable TV broadcast industry.

We are located in Shanghai, with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company develops a series of advanced equipment used in central office, that is, Optical Line Terminals (OLTs), Optical Network Units (ONUs) in broadband internet area and Optical Transmitters, 1550nm EDFAs, Optical Nodes in Cable TV multi-system platform. Otherwise, we present products of fiber optic testing & maintaining tools including Single Fiber Fusion Splicers, Fiber Cleavers, Cable Slitters, Fiber Cleaners, Splice Protection Sleeves, Single or Ribbon Fiber Mechanical Splicers, PON Power meters, Light Sources, VFLs, Fiber Identifiers and OTDRs. That help us assembling a superior team of highly talented engineers. With these people, we can design and provide all range of solutions and production services in optical access networks or "The Last Miles".

In addition, we have obtained ISO9001, SGS, the State Administration of Radio, Film & TV network access for broadcast equipment certificates and carry out IEC and CE standard strictly. In many cities and provinces around China, our products are widely used in Telecom, CATV, and all kinds of optical communication network. We also welcome OEM and ODM orders. Customized, Individual requirements and Samples are available. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. They will never disappoint you.

With Yogel, you will get more. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits.