

Add to Cart
5 Ton LW500FN WEICHAI Engine Tyres 23.5-25 Mechanical Operation Wheel Loader
LW500FN wheel loader is the latest cross-generation product
developed by on the basis of the globalized technologic resources.
The LW500FN wheel loader is the latest high-efficiency and
energy-saving product created by with ten years of professional
experience. The electrical system, hydraulic system, structural
parts, cab, hood, etc. are fully optimized and upgraded, and the
reliability, working ability, operating comfort, and easy
maintenance are significantly improved.
·Special material seals are used to resist low temperature and
pressure; international brand hoses and joints have long life and
no leakage.
·Dust-proof respirator is fully applied, the cleanliness of the
system is significantly improved, the service life of each
component is prolonged, and the reliability is improved by more
than 10%.
· Work harder
·Large strength: Optimized hydraulic system, stronger traction,
improved adaptability to working conditions.
·Small and medium wheelbase design, small turning radius, good site
adaptability and strong working stability.
·Optimized power transmission system, higher driving speed, and
comprehensive operation efficiency increased by more than 15%
compared with traditional models.
· Energy saving is more significant
·Energy-saving low-speed engine, patented technology,
high-efficiency and large-capacity torque converter, special
gearbox, energy saving effect is remarkable.
·Using new fuse box, centralized control of the whole machine
electrical appliances, convenient and efficient troubleshooting.
Product Paramenters
Description | Unit | Parameter value | |
Rated operating load | kg | 5000 | |
Bucket capacity | m³ | 2.5~4.5 | |
Machine weight | kg | 16900 | |
Dump clearance at maximum lift | mm | 3150~3560 | |
Reach at maximum lift | mm | 1100~1190 | |
Wheel base | mm | 2960 | |
Tread | mm | 2250 | |
Height of hinge at maximum lift height | mm | 4112 | |
Working height (fully lifted) | mm | 5510 | |
Max. breakout force | kN | 170 | |
Hydraulic cycle time-raise | s | ≤6 | |
Total hydraulic cycle time | s | ≤10.5 | |
Min. turning radius over tyres | mm | 5950 | |
Articulation angle | ° | 35 | |
Gradeability | ° | 28 | |
Tyre size | 23.5-25-16PR | ||
Overall machine dimension L×W×H | mm | 7910×3016×3515 | |
Model | WD10G220E21 | ||
Rated Power | kW | 162 | |
Fuel Tank | L | 250 | |
Hydraulic Tank | L | 210 | |
Travel Speed | Ⅰ-gear(F/R) | km/h | 13/18 |
Ⅱ-gear(F/R) | km/h | 40 |
Product Show