Add to Cart
Marine Boat Accessory Tug Ship Vessel Windscreen Sliding Wiper
Blade CCS Cab Wheel House Room
Specification
1.Power supply: | AC 220V,AC 110V,DC 24V |
2.Frequency: | 50Hz/60Hz |
3.Wipe speed: | 0.3~1.2m/sec |
4.Consumed power of motor: | ≤120W |
5.Consumed power of heater: | ≤450W |
6.Protection grade:6 | IP5 |
7.Outline dimension of control box(only for reference): | Box(mm): 88×80×98 |
Faceplate(mm): 120×100×4 | |
8.Power box external dimensions: | Box(mm): 88×80×98 |
Mounting dimensions:210×265 | |
9.Installation: | Main unit is mounted above outdoor side scuttle with the rod swinging downwards. If needing other installation method, both parties should confirm a special design and note it in technical specification. |
10.weight: | ≤26Kg |
Optional parts: | heater, waterworks, automatic resetting. |
Window wiper
horizontal electric window wiper is a kind of electrical window
wiper to be used for side scuttles in pilothouse and operating cab
in a vessel. It is powered via an speed-adjustable motor. Its guide
rail is made of aluminum alloy, which drives rubber wiper blade
mounted at lower end of stainless steel swing rod to wipe the glass
horizontally; thus to wipe off sea Water,Rainwater and snow, as a
result, to obtain a clear visual field. This product is appropriate
for various naval vessels and civil vessels.
Wiper
Windshield wipers are also called wipers, wipers, wipers or
windshield wipers. They are used to wipe off raindrops and dust
attached to the windshield of a vehicle to improve the visibility
of the driver and increase driving safety.
Principle of operation
1 The power source of the wiper comes from the electric motor,
which is the core of the entire wiper system. The quality
requirements of wiper motors are quite high. It uses a DC permanent
magnet motor, and the wiper motor installed on the front windshield
is generally integrated with the worm gear mechanical part. The
function of the worm gear mechanism is to decelerate and increase
the torsion, and its output shaft drives the four-bar linkage
mechanism, through which the continuous rotary motion is changed to
the left and right swing motion.
2 The wiper motor adopts a 3-brush structure to facilitate speed
change. The intermittent time is controlled by an intermittent
relay, and the charge and discharge functions of the return switch
contact of the motor and the resistance and capacitance of the
relay are used to make the wiper wipe according to a certain
period. The wiper blade rubber strip is a tool to directly remove
rain and dirt on the glass. The wiper strip is pressed against the
glass surface by the spring strip, and its lip must match the angle
of the glass in order to achieve the required performance.
3 Under normal circumstances, there is a wiper control knob on the
handle of the automobile combination switch, with 3 gears of low
speed, high speed and intermittent. At the top of the handle is a
washer button switch. When the switch is pressed, washing water is
sprayed, and the windshield is washed with the wiper. The scrubber
system is a very common device on the boat. It consists of a water
storage tank, a water pump, a water delivery pipe, and a water
spray nozzle. The water storage tank is generally a plastic tank of
1.5 liters to 2 liters. The water pump is a miniature electric
centrifugal pump. The washing water is divided into small jets and
sprayed to the windshield, which cooperates with the wiper to clean
the windshield.