UAV counter equipment 800-1500 meters air traffic control aerial vehicle driver jammer

In recent years, the UAV market has developed rapidly. With the scale of Bochuang space-time shield and the production of factories, such as Xinjiang, extreme flight, zero-degree intelligent control and so on, commercial drones are very cost-effective and more and more popular. However, the domestic supervision of UAVs, especially the "Black Flying UAV", is still in a blank state. The proportion of unmanned aerial vehicles flying in the air is about 90%, which poses a great threat to air surveillance and air safety.
Shenzhen Bochuang Space-time Communication Technology Co., Ltd., as an excellent safety equipment supplier, independently developed the UAV jammer, which can jam all GNSS satellite positioning signals, including GPS/ Beidou/Gore/Galileo, and can also jam ISM 2.4G and ISM 5.8G frequency bands common to UAVs, forcing UAVs to stay in a remote state. Control, map positioning, signal interruption to achieve the purpose of landing/returning/hovering.
The UAV jammer independently developed by Bochuang Space-time Communication is powerful, and the long-distance interference can reach 1-5km.
Shenzhen Bochuang Space-time Communication Technology Co., Ltd. interfered and shielded GPS satellite positioning signals, and also interfered and shielded 2.4G and 5.8G frequency bands commonly used by UAVs, forcing UAV remote control, map positioning and signal interruption to achieve the effect of uncontrolled landing/hovering/hovering.
1.5G 20 40dB 24V 1A power amplifier
Power amplifier 2.4G 40 40db. 24V 1.2A
Power amplifier 5.8G 10 37db. 24V。 1A
The interference distance is 10,000-1,500 meters away from the flight altitude of the test standard UAV.
One Range
This standard specifies the technical requirements and test methods of the interference interceptor for portable unmanned aerial vehicles (hereinafter referred to as interceptor).
This standard is applicable to portable UAV jamming interceptor products.
Two. Product model
Three. Product description
The interceptor uses four kinds of portable rifle base stations, which mainly control the flight mode of UAV or flight state, and cut off the connection between UAV and remote controller. Interceptors can force drones to fall or return to the air through interceptors, thus ensuring the safety of low-altitude airspace in this area.
IV. Installation and Operation Instructions
4.1 Installation Steps and Methods
4.1.1 Take out the shield machine from the box.
4.1.2 Turn the antenna to its own antenna pedestal, otherwise it will be invalid.
4.1.3 Hang the shielding cover to the wall or corresponding position, and the best installation height is 1-2m.
4.1.4 First ensure that the shield machine is fully charged, and then turn on the power switch. The power indicator on the power supply indicates that it starts to work.
4.2 Precautions
4.2.1 The antenna must be installed on the host according to the corresponding identification before connecting the main power supply.
4.2.2 The effective coverage area of the shield is a circular area centered on the shield. In order to avoid blind corners of the shield, the placement position of the shield should be carefully selected.
4.2.3 Shields should be placed in well-ventilated places to avoid shielding large objects and strong electric and magnetic sources of strong heat sources, so as to ensure shielding effect and long-term stable work.
4.2.4 When the protective cover works, other articles should not be piled up and the antenna removed, so as not to affect the shielding effect and damage the machine.
4.2.5 When the shield is not in use, the power should be cut off in time, so as not to affect the normal use of the mobile phone.
4.2.7 When using the protective cover outdoors, attention should be paid to waterproof.
4.2.7 When the field area is larger than the effective shielding range, it is recommended to adopt multi-shielding honeycomb installation to ensure the shielding effect.
4.2.8 Since the power supply and antenna are dedicated to the host computer, the factory debugging is one-to-one debugging, so please try not to exchange them to ensure the best effect.
4.2.9 Please keep away from corrosive gases and liquids, and do a good job of preventing dust and moisture, so as not to accelerate the aging of internal components of the equipment.
4.2.10 When placed outdoors or in the wild, pay attention to adding protective devices to rats and ants.
Five. Maintenance and maintenance
5.1 Shielding is maintenance-free equipment without maintenance.
5.2 When cleaning the surface, it is forbidden to use chemical solvents and avoid water ingress.
5.3 When using, the protective cover should be stored in a dry and ventilated place to avoid long-term exposure to salt mist and harmful gases.
5.4 shielding

Shenzhen Bochuang Time and Space Communication Technology Co., Ltd. produces and develops mobile phone screeners, gps screeners, prison screeners, wifi signal screeners, 2G mobile phone screeners, 3g signal screeners, signal screeners, 4G mobile phone screeners, 5G screeners, examination screeners, conference room information screeners, walkie-talkies screeners, unmanned aerial vehicles screeners, certificate identifiers, readers, GPS locators, remote control screeners, screeners, and escort car screeners A company specializing in the production and processing of products such as positioning and tracking screeners, short message screeners, screeners, wireless network screeners, mobile phone signal screeners, communication machines, metal detectors, signal enhancers, screen equipment and electronic accessories has a complete and scientific quality management system. Shenzhen Bochuang Time and Space Communication Technology Co., Ltd. has been recognized by the industry for its integrity, strength and product quality. Welcome friends from all walks of life to visit, guide and negotiate business.
In the past 20 years, Shenzhen Bochuang Time and Space Communication Technology Co., Ltd. has consistently focused on the field of electronic information confrontation, making a modest contribution to promoting the security of communication digital information.
The company is rooted in Shenzhen, the southernmost part of the motherland. With the unique advantages of electronic component supply chain and scientific research, it has seized the historical opportunity brought about by the rapid development of China´s information and wireless communication industry reform, adhered to customer-centered, striver-oriented, and continuously innovated based on customer needs, winning the respect and trust of customers. It has grown steadily from a small start-up enterprise with only a few people to an industry leader with monthly sales exceeding 6,000 units. Today, our wireless signal shielding equipment and solutions have been exported to more than 170 countries and regions around the world.
The company has a research and development team of professors, doctoral students and various professionals from domestic first-class universities. BCSK-101 series products: conference information security machine (mobile phone signal screen security machine), computer password security cabinet, portable mobile lighting system. As a leading provider of information shielding equipment and solutions, we provide competitive wireless signal control shielding solutions and equipment for consumers from all walks of life. We adhere to the focus strategy, continue to invest in research and development in the fields of communication basic network, new generation 4G and wireless local area network, and drive innovation with customer demand and cutting-edge technology, so that the company is always at the forefront of the industry.
We are convinced that the future will be a world where wireless communication is densely distributed in every corner, and information security and wireless communication signal control will be a "just-needed" field in the blue ocean. Aiming at the forefront of international security technology, serving information security is always the goal of Bochuang Time and Space Communication.