Horizontal SANKON 12.9kw AAC Block Cutting Machine

AAC block advantages:
1.Improved thermal efficiency reduces the heating and cooling load in buildings.

2.Porous structure allows for superior fire resistance.

3.Workability allows accurate cutting, which minimizes the generation of solid waste during use.

4.Resource efficiency gives it lower environmental impact in all phases of its life cycle, from processing of raw materials to the disposal of waste.

5.Light weight saves cost & energy in transportation, labor expenses, and increases chances of survival during seismic activity.

6.Environmentally Friendly: When used, it helps to reduce at least 30% of environmental waste as opposed to going with traditional concrete. There is a decrease of 50% of greenhouse gas emissions. When possible, using autoclaved aerated concrete is a better choice for the environment.

7.Energy Saver: It is an excellent property that makes it an excellent insulator and that means the interior environment is easier to maintain. When it is used, there is usually not a need for any supplementary insulation

Horizontal Cutting Machine

Aerated Autoclaved Concrete block machine line cutting machine Introduction:
The cutting machine is the most important part of Aerated Autoclaved Concrete block machine line.The production is more than 50,000m3. The cutting machine is the necessary hard-core,and is the indispensable part to improve the production. Our factory’s product--JL series cutter, this equipment can realize the cutting of the body one's goal instantly, six turn over cutting, because its advanced craft, there is no need of the second time hoisting, so can reduce the damage of th body because of multiple hoisting. Therefore, this product have been sold over the nation,and gain high praise from the ueser.With several years technological innovation,we have developed many kinds of models’concrete cutters.

Working principle:

After turn the body on the over turning platform with the Base Plate,move towards the cutter until the small sliding table. After 90 degrees turn over, move the body from the small sliding table to the cutting position,cut the body’ four sides horizontally,then lengthwise cutting.After cutting ,move the body from the small sliding table to the over turning platform,turn the body on the counter-turnplate by 90 degrees with reversing direction.

Main techniacl parameters

Features

1. Simple and practical model structure, easy to install and maintain;

2. The cake is placed sideways so that the width of the cake is 600mm and the height is 1200mm. The cutting wire is short, not easy to break, not easy to drift, and the cutting precision is high;

3. The longitudinal cutting device is fixed, and the longitudinal cutting is completed when the cutting trolley walks. The cutting time is short.The horizontal cutting device adopts steel wire cutting to shorten the length of steel wire and ensure the cutting precision.

4. The milling groove can be completed when the cake is vertically cut, without the need for additional groove processing equipment;

5. The aerated concrete cutting machine cuts the billet body on six sides, and the product quality is not affected by the mold oil and mold deformation;

6. Aerated concrete airdrop cutting machine can produce plates in addition to blocks;

7. The cutting process of machine type (flip, longitudinal and transverse) is completed at different work stations. The work of each work station is simplified and the operation and maintenance is convenient.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.