L6140mm AAC Autoclave Sling

The sling (see the picture) is a match equipment for autoclaved aerated concrete cutting machine. It is installed on the automatic billet shift machine, the lifting is controlled by the guide frame. It is a special tool to move the de-skin billet to the autoclave.

Application:

It is used to move the billet and the side panel to the turning table for de-skin.

Technical parameter:

1.Maximum Size (Maximum)(including guide frame)

L:6140mm W:1700mm H:4810mm

2.Weight:3800㎏

Structure:

The sling is composed of a horizon beam, a vertical beam, a guide frame and a lifting unit.

The two beams are made of huge steel pipes, so it is featured of good stiffness, compact structure and it can be easily installed and debug.

Lifting device is located on the horizon beam and the guide unit is fixed on the vertical beam.

Working principle:

When the over-head hanger rope is lifted by the pulley wheel lifts, the guide unit will move along the frame and then the sling will go up and down.

Assembly:

Following procedure should be performed

1.To combine the horizon beam and upright beam t together.

2.To connect the guide frame to the automatic billet shift machine.

3.To combine guide device and its frame together

4.To assemble the lifting device and guide frame together

Pilot running and debugging:

1.Pilot running

The sling can go up and down smoothly and stably, without any abnormalities, no jamming and no swaying.

2.Debugging

a.If the horizon beam is not critical to the upstanding beam, a pad is needed.

b.The gap between the wheel and frame may be proper if it is swaying.

Maintenance and repair:

1.Maintenance

a.Please remove the dust on the piston rod after work with cotton cloths and make sure it is reset.

b.To clean up the lifting device, guide unit without any waste left.

2.Repair

Please check all fasteners to avoid any possible loose and change worn parts.

Cautions:

1.Please turn off the power after work

2.Please keep away when it is running.

Packing & Shipping:

Package conforms to the requirements of customs.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.