ODM Overturn Table Semi Automatic Block Making Machine

Tilting table/Overturn table composition:

The bottom peeling table is mainly composed of reversing frame, blank body trolley, side plate trolley, moving device, pressing rod, roller, reversing seat and bearing, etc.The reverse and movement are controlled by hydraulic cylinder.

Working principle:

By semi-finished products spreader will finish cutting the embryonic body together with the mold side panel to prevent bottom leather flip a little on a block and tackle, and start the magnetic chuck, flip hydraulic system start, body together with the mould flip side panel 90 ° peeling device by up and down movement, will waste away (waste will flow into the waste slurry pool and retake casting), flip the hydraulic system start going back the initial position, semi-finished products spreader swing body, together with the side panel into tank before the car.

Functions:

Aerated concrete block tilting table is an embryo body tilting device to remove the bottom and top wastes, thus improving the utilization rate and yield of waste products.

Maintenance :

1, maintain

A. Maintain the hydraulic station according to the instructions.

B. After the production, wipe the dirt off the piston rod (the protruding part) with cotton cloth and reset it.

C. Clean the waste materials in all parts.

2, maintenance

Check fasteners and piping system thoroughly every week, tighten loose parts and replace damaged parts.

The bottom peeling table is developed mainly for the realization of six-sided cutting of the blank body of aerated concrete block, which solves the problem that the blank body is easily damaged by manually removing the bottom waste in the traditional production line, and improves the production efficiency of enterprises.The aerated concrete block turnover table designed by our company has been widely used in China.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.