Add to Cart
Introduction:
Based on the introduction of foreigh technologies,multi-laminated broken crushing and less milling and according to customers' needs the CS-series spring cone crusher which combines the high-frequency,optimized cavity and reasonable strokes together.Practices have proved that CS-series spring cone crusher wins the worldwide customers' trust by its excellent performance,reliable quality and cost-effective ratio.
CS-series spring cone crusher is widely used in metals and non-metallic minerals.cement,construcation,metallurgy,transport,sand and gravel production and especially for iron ore,gold ore.non-ferrous metal ore,granite,basalt,pebble,quartzite,sandstone,limestone and other hardness and medium hardness ore and rock.
CS-series spring cone crusher is applied in gravel construction and artificial sand processing especially in crushing hard material such as basalt. it is not only of high efficiency and low production costs but also of excellent shape ans high-quality sand and gravel aggregate.
CS-series spring cone crusher is used in black and non-ferrous metal ore-dressing process. It can reduce the partical size of the ore effectively entering the mill and realizes the more crushing and less milling.This not only improves the capacity of the mill,but also saves electric and steel to improve the economic benefits of selected plants.
Working pricile:
When the spring cone crusher works, the rotation of the motor will rotate around the fixed point around a circle under the forced action of the eccentric sleeve through the pulley or coupling, the drive shaft of the crusher and the cone part of the crusher. As a result, the crushing wall of the crushing cone sometimes gets close to and sometimes leaves the surface of the mortar wall fixed on the adjusting sleeve, so that the ore is continuously impacted, squeezed and bent in the crushing chamber to realize the ore crushing.
Advantage:
1. Cost saving: CS series spring cone crusher covers a very small
area. How expensive the land is today, it can also save a lot of
land costs. In addition, it is small in size, light in weight and
easy to move, which attracts many investors.
2. Intelligent safety: full automatic control system and touch
screen control mode are adopted. The operator can sit in the
monitoring room for real-time monitoring. The operation is simple
and convenient. The higher the safety factor of the equipment is, a
new generation of protection circuit is installed to ensure the
safety.
3. High output: the main shaft adopts wear-resistant steel and cast
steel technology to improve the wear resistance of the equipment
and reduce the failure rate of the equipment. The laminated
crushing principle is adopted to achieve higher production
efficiency. At the same time, it avoids the problems of uneven
particles and damage when the equipment is crushing materials, and
the particle size can be adjusted arbitrarily according to its own
needs.
4. Green environmental protection: the overall sealing is
strengthened, the dust inside the crusher is reduced and the ash
leakage of the machine body is reduced. At the same time, the dust
remover and silencing equipment are set up to realize the green
environmental protection production, and the work is more
energy-saving and lower carbon operation.
Techncal parameters:
Model | Dia.mm(mm) | Cavity | Feed opeing | Outlet setting(mm) | Shaft speed(r/min) | Power(kw) | Capacity(t/h) | Weight(t) | Dimenson(mm) | |
Closing side(mm) | Open side(mm) | |||||||||
CS-75B | 900 | Fine | 83 | 102 | 9-22 | 580 | 75 | 45-91 | 15 | 2821*1800*2164 |
Coarse | 159 | 175 | 13-38 | 59-163 | ||||||
CS-110B | 1200 | Fine | 127 | 131 | 9-31 | 485 | 110 | 63-188 | 20 | 2821*1974*2651 |
Medium | 156 | 156 | 13-38 | 100-200 | ||||||
Coarse | 178 | 191 | 19-51 | 141-308 | ||||||
CS-160B | 1295 | Fine | 109 | 137 | 13-31 | 485 | 160 | 109-181 | 27 | 2800*2342*2668 |
Medium | 188 | 210 | 16-38 | 132-253 | ||||||
Coarse | 216 | 241 | 19-51 | 172-349 | ||||||
CS-240B | 1650 | Fing | 188 | 209 | 16-38 | 485 | 220 | 181-327 | 55 | 3911*2870*3771 |
Medium | 213 | 241 | 22-51 | 258-417 | ||||||
Coarse | 241 | 268 | 25-64 | 299-635 | ||||||
CS-315B | 2134 | Fine | 253 | 278 | 19-38 | 435 | 315 | 381-726 | 110 | 4613*3251*4732 |
Medium | 303 | 334 | 25-51 | 608-998 | ||||||
Coarse | 334 | 369 | 31-64 | 789-1270 |