0.08 W/M.K Carbon Fiber Felt BOD Graphite Felt For Battery

Soft Felt - Standard Carbon Felt

Introduction:

Carbon fiber felt is a felt made of carbon fiber. It has a broad absorption spectrum with a large capacity. The adsorption capacity of gasoline, aldehydes, phenols, alcohols, olefins and other organic vapors is several times to dozens of times larger than that of activated carbon (GAC). It has good adsorption for inorganic gases (such as No, N, HF, HCl, etc.).

Technical index:

Specification:

Length (m) ≤ 20

Width (m) ≤ 1.4

Thickness (mm) 3-18

Warp direction: 8 ~ 14

Weft direction: 10 ~ 16

Thermal conductivity: < 0.08 w / m.k

Ash content: 0.765%

Application :

1. It can be used as a flame retardant material in the insulation industry;

2. As a porous material, it can be used as a catalyst carrier for the chemical industry;

3. It can be used as a corrosion-resistant material for the lining or external protective layer of composite materials.

4. It can be widely used as a conductive, absorbing and absorbing material in aviation, batteries, electrodes (such as electrode tubes, electrode sticks, etc.); at present, applications related to conductive concrete are also developing rapidly.

Features:

The adsorption capacity of COD, BOD and oil in aqueous solution is much higher than GAC. The adsorption resistance is small, the speed is fast, and the absorption is rapid and thorough.

Production method:

The manufacturing methods are: (1) needle punching after air-laid short carbon fiber; (2) carbonization of pre-oxygen silk felt; (3) pre-oxidation and carbonization of polyacrylonitrile fiber felt. It used as insulation material for vacuum furnace and inert gas furnace, hot gas or liquid and molten metal filter material, fuel cell porous electrode, catalyst carrier, composite material lining and composite material of corrosion-resistant contai

Hunan MTR New Material Technology Co., Ltd. (formerly Zhuzhou Green Carbon Fiber Products Co., Ltd.) is a high-temperature furnace thermal insulation material production plant! Our company adheres to the corporate philosophy of singularity, focus and professionalism, and is committed to the continuous development and application of thermal insulation material technology.

The company’s main products include graphite hard felt, reinforced composite hard felt, multi-type composite hard felt (made in an overall shape), graphite felt, high-temperature carbon felt, and other thermal field insulation materials. The rigid felt series have a rigidity that traditional insulation materials do not have. Supporting, high strength, no short fiber shedding, low thermal conductivity and other advantages, more energy-saving, environmentally friendly, easy to disassemble, easy to maintain, and can extend the service life of the high-temperature furnace. The product is suitable for all kinds of high-temperature vacuum furnace equipment (such as: single crystal growth furnace, polycrystalline casting furnace, polycrystalline reduction furnace, polycrystalline ingot furnace, vacuum sintering furnace, hot pressing furnace, heat balance furnace, electromagnetic induction furnace, medium and high-frequency Induction furnaces, non-oxidizing atmosphere high-temperature equipment, high-purity silicon hydrogenation furnaces, etc.) are widely used in solar energy, vacuum metallurgy, new chemical materials, atomic energy, semiconductors, new electronic energy and other fields.

Customized drawings can be made to produce various non-standard and special-shaped geometric shapes such as flat plates, discs, cones (discs), and cylinders! Can provide the overall installation service of the hot cell.