Product Details
Outdoor Light Lighting 6M 20KG Portable Winch Up Mast
We supply telescopic mast up to 20m,it can bear payload less than 10kg,usually used as antenna mast,communication tower, light support, camera mast and so on.
A.it can be adjusted to any length
B.it can be mounted on the vehicle or stand on the ground with
tripod
Specifications:
material:usually aluminum alloy
6meter
telescopic aluminum mast body
tripod system
trolley base
max height: 6 meter
4 sections
closed height: 1.7meter
weight:20kg
gued wire equipped
ground nuts
Telescoping Aluminum Mast
For WiFi, Portable Antennas, Elevated Photos and light tower
Ideal for: Emergency Response Antenna Systems, Restricted Space Antennas -
Prepping Systems Elevated Photography - Weather Instruments - WiFi Site Surveying -
End Zone Cameras-light tower Our best-sellingpush-up pole is made of the highest quality
aluminum and built to last. Extremely portable but ready to provide
years of permanent service too!
light weight for easy carrying and perfect for temporarily
supporting antennas. More versatile than fiberglass or plastic
masts and particularly useful when a lightweight metal mast is
required.Tube wall thickness is2mm and heavy-duty thumb nut
compression clamps make for quick and easy adjustment of individual
sections.
You can raise any section by any amount to get the exact height and
rigidness you need! When securely mounted at the base and with most
lightweight items attached, guying is not usually necessary.
However, guying is always recommended.
The most frequent question we are asked is "How much weight will
this mast support?" The answer is... It will depend entirely on
what you mount on it, how it is mounted at the base, if guys are
used and how you plan to extend the mast with the load attached.
Our own personal, unscientific experience has shown 5 to 10 pounds
of vertical weight is reasonable. Keep in mind, this is vertical
weight and wind and/or off-center mountings may cause the mast to
sway or flex. Once again, guying and a good base support is highly
recommended.
Used in conjunction with our matching mounting brackets, this mast
(portable light weight) is IDEAL for permanent mounting on RV's,
buildings or posts! The ability to raise and lower it quickly means
this mast can stay mounted all the time. For portable applications,
we have matching tripods and drive-on tire mount options available
too. See our other listings for more info on these items!
Spare parts are available but rarely needed!
|
|
|
Product photo:
specification for other heights:
Hand winch –with bottom square tube
extended height (m) | No. Of section | Retracted height(m) | Outer tube range(mm) | Self weight (kg) | Max.payload (kg) |
3 | 2 | 1.6 | T50-T60 square | 3 | 50 |
4 | 3 | 1.4 | 50-60 -T70 | 4 | 40 |
5 | 3 | 1.77 | 50-60- T70 | 5 | 40 |
6 | 4 | 1.6 | 50-70 -T80 | 6.5 | 30 |
7 | 4 | 1.85 | 50-70- T80 | 7 | 30 |
8 | 5 | 1.7 | 40-70-T80 | 9 | 20 |
9 | 5 | 1.9 | 40-70- T80 | 10 | 20 |
10 | 6 | 1.75 | 40-80-T100 | 12 | 15 |
12 | 7 | 1.8 | 40-90-T100 | 28 | 10 |
15 | 8 | 1.95 | 40-100-T120 | | 10 |
Note: bottom square tube show as T-70, means: 70*70mm square tube
Company Profile
Establised at the year of 2008, from begnning, we only produce hand
push antenna masts, later on we developed hand winch type mast, and
hand winch lattice tower, we focus on the manufacturing light
weight, easy to operation mast and towers. They are ideal product
to replace the pneumatic tower.
Our products mostly used for home antenna, home decoration
lighting, CCTV monitoring, WIFI, and temperoray telecom.
Sometime, clients are looking for tower or mast just for a simple
use, but on the market there are always heavey and expensive
products, our aim is to fill the gap of small & compact and
light weight item for selection.