Product Details
High Efficiency hydraulic system marine telescopic boom crane
Marine crane model for offshore operation All-cargo fixed folding
boom crane, telescopic boom crane for aerial operation, the steel
wire rope should be kept in the drum for at least three turns
during operation. During operation, no one is allowed to cross the wire rope of the
hoist, and the wire rope is not allowed to be dragged along the
ground. During operation, it is forbidden to leave the job without
authorization, and others are not allowed to open the machine
indiscriminately. Listen to the commander's signal at work. If the
signal is unknown or may cause an accident, the operation should be
suspended until the situation is clear. In case of sudden power
failure during the operation of three-wheeled crane, you should
immediately open the switch breakpoint and put down the transported
objects. The crane is sealed as a whole to prevent it from being
affected by wet environment, and the internal key parts are well
protected to achieve the purpose of anti-corrosion. The turning
moment is large, and it can withstand the comprehensive inclination
angle of the hull tilt up to 5.38 (working condition in standard
sea area), even up to 8.96, with Platts wind scale of 6. Built-in
oil cylinder expands and contracts, which makes the performance
more reliable, and the oil cylinder conforming to plating has
better anti-corrosion performance.
Product Parameters
SWL | 0.5T |
MAX WORKING RADIUS | 6m |
MIN WORKING RADIUS | 1.5m |
HOISTING SPEED | ~10m/min(main hook) ~30m/min (aux hook) |
HOISTING HEIGHT | 30m |
SLEWING SPEED | 0~0.5r/min |
SLEWING ANGLE | 360° |
LUFFING TIME | ~ 120s |
WORKING CONDITION | TRIM ≤2°HEEL ≤5° |
ADVISED OIL FLOW | 92L/min |
MOTOR POWER | 15kw |
DEAD WRIGHT | 2200KG |
POWER RESOURCE | 380v,50Hz,3P |
PROTECT CLASS | IP56 |
INSUKATE CLASS | F |
WORKING TYPE | S1
|
GA Drawing
Photo
Why Choose OUCO Marine Crane?
- OUCO uses special marine-grade steel plates, DH36 for better
corrosion resistance and EH36 for -40°C conditions.
- The more symmetrical center design of the octagonal boom makes it
have a bigger anti-bending capacity.
- OUCO Marine Crane can be telescoped and folded with a load.
- OUCO has simulated marine working conditions, with a Trim≤2° and
Heel≤5°.
- OUCO uses fan coolers to ensure long-lasting operation of the crane
at high temperatures.
- OUCO uses holding valves to ensure crane safety in case of
hydraulic system failure.
- OUCO uses stainless steel grease nipples to avoid rusting under
marine conditions.
- The anti-two block system, composed of a top limit and bottom
limit, ensures the winch's safety.
- OUCO uses a precise step-less speed control valve.
- Emergency stop devices are installed on each crane.
- OUCO follows the C5M marine painting rules and uses world-famous
paint brands.
Welcome to visit our factory!
Company Profile
Founded in February 1984, OUCO Industry occupies a
48,000-square-meter facility, including 35,000 square meters of
construction area. Our headquarters in Jiangsu Province, the heart
of China's crane industry, positions us at the center of advanced
machinery manufacturing.
Our team of over 150 employees includes 20 skilled technical staff,
among them five senior-level and 10 mid-level professionals. We
employ 50 certified welders holding qualifications from leading
institutions such as CCS and ABS. OUCO also maintains a dedicated
team of certified flaw detection experts, quality system auditors,
and experienced inspection personnel, ensuring the highest quality
standards.
OUCO provides high-quality handling equipment and one-stop
solutions for the marine and port industries. We develop, design,
and manufacture marine cranes, grab buckets, LARS systems, and
environmental protection products. Our products serve a wide range
of industries, including metallurgy, shipbuilding, ports, power
generation, petroleum, building materials, wind power, and
chemicals.
With strategic operations across Europe, Asia, Africa, Australia,
and the Middle East, OUCO serves a diverse global clientele. Our
annual steel structure production capacity is 11,000 tons.