Small Paddy Hydraulic 3 Ton Tracked Power Wheelbarrow

Lawn Hydraulic Crawler Mini Track Transporter Dumper Small Paddy

Brief Introduction

Crawler dumper's ability to adapt to the terrain is very strong, is to adapt to the potholes muddy road, according to the word of the pressure, large crawler grounding area, vehicle weight of pressure can be effectively distributed to a larger area, the pressure becomes small, for bad road conditions or bad terrain, can easily through, under normal circumstances, the paddy field, mud, mountain and marsh DeKuang, apply caterpillar trolleys, smooth transportation, in loose pavement has better maneuverability.

Configuration of the whole vehicle:

It is composed of hopper and walking underframe. The hopper is installed in the front part of the tire walking chassis, and the material in the bucket is tilted and unloaded by means of gravity or hydraulic cylinder thrust. Unloading can be divided into forward dumping, rotary unloading, side turning unloading, high support point unloading and lifting tipping unloading.
In order to better adapt to the uneven road conditions on the site, avoid material scattering as far as possible, and ensure accurate, rapid unloading, low operation, and better off-road performance and strong climbing ability, it is required that the speed of the four vehicles is not too fast (recommended: generally high speed is better than 20 km / h). The dumper with the driving bridge in front (hopper above it) and the driver seat at the back is suitable for short-term transportation of sand, stone, mortar, brick, concrete and other materials.

Operation precautions for crawler transport vehicles

1. before driving, it must be inspected and accepted by equipment and safety management department, and the road can only be driven after it meets the requirements of the road and has obtained the permission for use.
2. the driver must be trained by Angu and take up his post with a certificate. It is strictly forbidden to drive without certificate or after drinking. The condition of carrying people or driving against regulations.
3. before starting, the vehicle shall put the shift lever in the neutral position and pull up the hand brake.
4. after the vehicle is started, it is necessary to check various instruments, direction mechanism, brake device, light, etc. in the vehicle, and then start the vehicle after the whistle is sounded after it is sensitive and reliable.
5. when driving in rainy, snow and fog weather, the high speed of the vehicle shall not exceed 25km / h. when turning, the vehicle shall not slide across.
6. if the vehicle cannot be driven during unloading, the vehicle shall be stopped stably before lifting the locking mechanism handle for unloading. It is forbidden to carry out bucket turning and unloading at the same time of braking to avoid the occurrence of inertia displacement accident. When the ramp is stopped and unloaded, the handbrake shall be tightened.
7. reverse and stop shall not be near the edge of foundation pit (groove) to prevent the overturning of soft soil vehicles.
8. the maintenance or after shift brush must be extinguished and the hand brake shall be pulled. If the driver wants to leave the cab, he shall drive the car to a safe area and then stop and drag the car before he can leave.
9. regular inspection and maintenance shall be carried out.

The dimensions of 3 Ton Crawler Dumper:

Jinzhou City Shitan Machinery Equipment CO. LTD. is a professional production and

processing company for core drilling rigs, crawler drilling rigs, various track chassis, various

types of mud pumps, various track transport vehicles, etc. It is one of the outstanding

manufacturers of similar products in North China. Strong technical force. The modern production

equipment and complete testing means are specialized in the development, manufacture and

marketing of drilling rigs.

To ensure the quality and stability of the machine, we use the most advanced production and testing

equipment, Made from high quality materials, with fashion and compact design, that keeps our drilling

rigs more efficiency and with low failure rate, more economic and durable, and with a high comprehensive

cost performance. Our water drilling rigs have received the real market validation as the majority of our

customer’s positive feedback.

The company's main products are rigs: XY-1, XY-1A, XY-1B, GK-180, GK-200, DPP-100 and other series

of drilling rigs: gearbox assemblies and gyro assemblies for various rigs, Winch assembly, reducer assembly,

pump assembly. Drilling tools: sedimentary pipe joints, casing joints, casing couplings, drill pipe joints, casing

core pipes, lifters, automatic drop hammers, earth borrowers, standard penetrations, forks, lock joints, alloy drill

bits Hundreds of drilling tools, such as steel sand drill bits, core pipe joints, drill pipe pliers, and casing pliers.

Jinzhou City Shitan Machinery Equipment CO. LTD. has a complete and scientific quality management

system. The integrity, strength and product quality of Jinzhou Stone Exploration Machinery Co., Ltd. have been

recognized by the industry. Welcome friends from all walks of life come to visit, guide and negotiate business!