Spring Support Busbar Accessories For Busbar Installation
Brand Name:Kiande
Certification:ISO9001
Model Number:KD-TH
Place of Origin:China
Name:Spring Support
Package:plywood
Contact Now
Add to Cart
Verified Supplier
Location:
Suzhou Jiangsu China
Address:
NO 123 Suzhou Dadao East Road Suzhou Jiangsu China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Spring Support Busbar Accessories For Busbar Installation
Key Specifications / Special Features:
Spring support used on bus bar installation
We are a one-stop shop for customers to buy bus bar accessories.
1. Custom
2. 3C compliant
3. Enough stock for standard ones
We are a one-stop shop for customers to buy bus bar accessories.
1. Custom
2. 3C compliant
3. Enough stock for standard ones
| No. | Item | Specification | Parameters |
| 1 | Spring support | 60*40*5mm | |
| 60*40*3mm | |||
| 2 | Spring | 17L120 | L=120mm |
| 3 | Double headed bolt | M10*230mm | |
| 4 | Support | Vertical / flatwise |
Installation Instructions for mounting spring hanger
1 Fit the Spring Hanger to the ‘U’ clamp already fitted to both
side of the bustrunking (Rising Mains)..
2 Remove nut A from Rigid hanger assembly, and pass the M16 bolt
thru the holes in the ‘C’ channel already grouted
on the floor/wall
3 By virtue of bustrunking weight the spring will compress and
creates a gap between nut ‘C’ and L support. Tighten nut
‘C’ by hand so as to eliminate the gap.
4 Adjust nut B on both sides of bustrunking until it reaches
desired level for fixing joint with lower bustrunking. Ensure
that nut B is adjusted equally on both sides to install bustrunking
vertically straight.
5 Lock nut A from lower end of bolt to the ‘C’ channel.
6 Repeat step #1,2,3,4,5 for subsequent bustrunking.
7. Loosen nut C to allow enough gap for spring to expand under
thermal conditions after complete installation.
Spring Support Busbar Accessories For Busbar Installation
Inquiry Cart
0