AC 50kw EV Battery Charger For Lithium Ion Battery

Automatic Variable Frequency Charger 2kw-50kw Car battery charger for lithium ion battery RV/caravan

What is car battery charger?​

• An electric vehicle/E-car charger is a device designed to charge the vehicle battery of an electric vehicle. A power conversion device with specific functions is used to charge the battery. Electric vehicle chargers can be divided into DC chargers and AC chargers.

Deligreencs Automatic variable frequency charger, using imported military grade IC and IGBT power modules as switching power control chip. Optimized design, standardized production process, perfect hardware and software, with reliable stability.

Product features:

1．Switch power circuit, small size, light weight, high efficiency；

2．Automatic features, the whole charging process without manual guard;

3．Fast charging and high charging reduction efficiency;

4．Prevent overcharge or undercharge of the battery to extend the battery life.

5．The charging current can be fine-tuned within the range of 15-30A, and is not affected by the change of the input ac voltage, The current remains unchanged during the constant current charging, and no manual readjustment is required.

Installation and Use

Installation

1. Unpacking: please check the accessories inside the box when unpacking: one copy of operation manual;

2. Check before electrification: damage should be checked before electrification of chargers that have been stored and transported. If damp, loose screws, abnormal appearance, as well as whether the power line and terminal posts are shaken off, if any of the above phenomena occurs, it shall be timely and properly handled;

3. Wiring: properly connect the power cord according to the mark;

4. Setting: the fan of the charger works in temperature control mode. When the fan reaches the starting point, the fan works. When the internal temperature rises to (70 ~ 75)℃, the charger will stop working. When the temperature drops, the charger will start working again automatically.

Use

1. Wiring: connect the power supply and load, positive/negative electrode should be connected correctly, otherwise the power supply will be damaged, make sure the connector is firm and the connection is correct;

2. Power on: the LCD panel lights up, adjust the knob to set the voltage and current.

E.G.:

Charging current:

1) Conventional charging, charging current is generally selected according to the charging rate of 10 hours, that is:

Charging current (A)= rated capacity of the battery (Ah)÷10(h),

For example, for 200Ah batteries, the charging current (A)=200Ah÷10h=20A.

• Fast charging: the capacity of the battery (AH) ÷ the time required to complete the charging = the selected charging current A. Until the current of charger display shows 0A, you can end the charging or continue to maintain the trickle/floating charge on power-on status.
• Online charging: charging current can be selected according to the conventional charging method.Namely: charger → battery → load (or engine) connected together to use, suitable for a long time no guard occasions.

3. The charger starts to charge until the charging is completed, and the LCD panel shows capacity 100%, current shows 0A, indicating that the battery is fully charged. At this time, you can shut down the charger, and remove the battery, or continue to maintain the trickle/floating charge on power-on status.

How to solve the lead-acid battery problem of vulcanization, polarization, battery imbalance, overcharge and undercharge?

1. Desulfurization

Frequency conversion combined pulse: Add combined pulse in the constant current and constant voltage stage, use the spike pulse in the intelligent pulse to interfere with the vulcanization of the battery during the charging process, and at the same time crush the nucleus of the lead sulfate crystal to make it difficult to form sulfate.

Temperature compensation: Accurately collect the external and internal temperature through thermistor electronics, and intelligently adjust the charging voltage, so that the battery will not be undercharged or overcharged, and the vulcanization phenomenon can be minimized.

Deligreen car charger can make your lead acid battery 2 year longer life.

2. Depolarization

Temperature compensation: to accurately control the voltage, control it below the polarization point (for the floating charge stage: monomer 2.42V-2.45V)
Variable frequency combined pulse: A variety of variable frequency pulses are combined into a pulse group, in order to learn from the strengths and make up for the shortcomings, to achieve the best charging and depolarization performance. The variable frequency composite pulse charging current is accompanied by instantaneous forced depolarization while charging, which effectively reduces Resistive polarization, concentration polarization and electrochemical polarization generated during battery charging.

3. Battery pack imbalance handling

Frequency conversion pulse charging: The water loss is one-third of that of the ordinary charger. If the water loss is small, the voltage difference of the battery pack will be small; on the contrary, if the water loss is large, the voltage difference of the battery pack will be large. As the amount of water loss increases, vulcanization will increase, and ordinary chargers do not have the function of removing vulcanization, so the battery pack is seriously out of balance. When our combined pulse is charging, the water loss is small and the voltage difference of the battery pack is also small. When the battery is vulcanized, it can be removed by pulse to make the entire battery pack tend to balance.

Changsha Deligreen Power Co., Ltd. was established in 2010 .

Deligreen is a one stop power system provider, engaged in research and development and sales of lithium battery and its accessories.

We target at offering high quality products with fair price for residential and commercial energy storage, solar system and Electric vehicles.

The main products are the distribution of large cell of domestic famous brand,battery pack ,BMS, Active balancer, charger, home energy storage and electric vehicle charging cable. Among them, the active balancing module is our unique advantage product. There are few technologies in China that can truly achieve active balancing and protect the battery. After three years, we have built our own brand product, Deligreencs BMS, which sells well in more than 60 countries around the world. The company structure is divided into three parts: factory, warehouse and office. The warehouse has more than 200 commonly sold standard products of BMS and electric vehicle charging equipment, which can provide fast delivery for factories,retailers and distributors. We have warehouse in US,PL, RU ,which help customers receive the goods in 5~7days.

At present, there are more than 15 office staff, including one designer, one technical consultant and one after-sales support. They have received professional training and have good business and communication skills. At the same time, our company provides customers with marketing support and planning scheme. The business philosophy of the enterprise is: let the staff get material and spiritual benefits. Treat every customer as a lifetime customer. Hope to get a long and stable development.