400A Smart Uart Cable Battery Management System BMS
Brand Name:Deligreencs
Certification:CE/UL/ROHS/FCC
Model Number:LFP16S48V400A
Minimum Order Quantity:1
Delivery Time:10 days
Payment Terms:D/A, D/P, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Hunan China
Address:
Room1148-1422,Dujuan Road,Yuelu area,Changsha,Hunan,China
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Product: Deligreencs Lithium Battery Management 400A Smart BMS with CAN Module Bluetooth Module Uart Cable
(For 3.2V rated LiFePO4 battery pack only)
Advantage
◆ Use top quality (A-level) protective integrated circuit IC, from
the solution of Seiko of Japan. IC itself has power balancing
function. The circuit is simple and reliable.
◆ Strong load ability, constant discharge current 100A 120A 200A 250A, , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
◆ Typical voltage detection for each cell. So each battery will be
prevented over charged or over discharged. Over current and short
circuit protection function is very reliable.Long time short
circuit of the load won’t affect the PCB and the
battery.Temperature protection during charging and discharging.
◆ Extreme low power consumption. The consumption of the whole
device is less than 50uA.
◆ PCB use high anti-corrosion, high water resistance, high
impedance ESD conformal Coating.
Feature
◆ UART : It is Daly normal product. UART is Universal Asynchronous
Receiver/Transmitter, It transforms the data to be transmitted
between serial communication and parallel communication. As a chip
to convert parallel input signals into serial output signals, UART
is usually integrated into other communication interfaces.
◆ RS485: Please choose the model RS485 of Daly. RS-485 adopts
balanced transmission and differential reception, so it has the
ability to suppress common mode interference.
◆ Bluetooth module : if you need this function, Please choose
bluetooth module, if you do not buy it, we will not send it to you.
◆ Below accessary need you to buy separately.
1. USB to UART Cable
2. USB to RS485 Cable
3. Bluetooth module
4. Power display panel (key activation)
5. BMS touch control screen
6. LCD touch screen
| Bluetooth module | choose by customer |
| UART to USB cable | choose by customer |
| 485 to USB cable | choose by customer |
| CAN to USB module | choose by customer |
| Power indicator | choose by customer |
| LCD touch screen | choose by customer |
Attention: Customer need to identify the battery's series, then
choose the same series BMS. Such as your battery is 24S, you must
choose 24S BMS, can not choose 20 or other one. The number of
series of BMS is fixed ,not adjustable once the BMS is shipped out
.
◆ Control instructions: remote control device monitoring.
◆ Vehicle icon: data transmission send command
◆ Statistical report: Collect the data information, the customer
can monitor the battery capacity & other alarm infomation.
◆ Electronic fence: fence setting limit range.
◆ Device information: device parameter information, etc.
Basic Specification of the bms
| Datasheet for 3.2V LifePO4 BMS( 150A-500A ) | |||||||||
| Content | Spec | Unit | Remark | ||||||
| 150A | 200A | 250A | 300A | 400A | 500A | ||||
| Discharge | constant discharge current | 150 | 200 | 250 | 300 | 400 | 500 | A | |
| Over-discharge current protection | 500±10 | 600±100 | 600±100 | 1000±200 | 1200±200 | 1500±200 | A | ||
| charge | charge voltage | Series No. * 3.65 | V | ||||||
| charge current | 40 | 50 | 60 | 75 | 100 | 125 | A | Common port | |
| charge current | 50A as default | A | Separate port | ||||||
| Over charge protection | over charge volt | 3.75±0.025 | V | ||||||
| over charge volt protect delay | 1 | S | |||||||
| Over charge volt release | 3.55±0.05 | V | |||||||
| Power balancing | Power balance volt | 3.5 | V | ||||||
| balance release volt | 3.5 | V | |||||||
| balance current | 35±5 | mA | |||||||
| Over discharge protection | Over discharge detect volt | 2.2±0.1 | V | ||||||
| Over discharge detect delay | 1 | S | |||||||
| Over discharge volt release | 2.7±0.05 | V | |||||||
| Over current protection | Over current detect delay | 1 | MS | ||||||
| Over current protect release | Off-load | ||||||||
| Short circuit protection | Short circuit protection | External load short circuit | |||||||
| Short circuit detect delay | 250 | uS | |||||||
| Short circuit detect release | Off-load | ||||||||
| Temperature protection | Temp protection | charge＜0℃, discharge＞70℃ | ℃ | Can be customized | |||||
| resistance | Main circuit resistor | ≤20 | mΩ | ||||||
| Self-consumption | Working current | 100 | uA | ||||||
| Sleepy current(when battery is over discharged ) | ≤20 | uA | |||||||
| Working temp | temp range | -40~80 | ℃ | ||||||
| Storage temp | Temp range | -40~80 | ℃ | ||||||
BMS Demensions
| BMS board size | |
| 16S 48V 80A | 66*166*18mm |
| 16S 48V 100A | 66*166*24mm |
| 16S 48V 120A | 95*210*20mm |
| 16S 48V 150A | 95*210*20mm |
| 16S 48V 200A | 120*220*36mm |
| 16S 48V 250A | 120*220*36mm |
| 16S 48V 300A | 120*244*53mm |
| 16S 48V 400A | 120*244*53mm |
| 16S 48V 500A | 120*244*53mm |
Wire Specifications
| Current | Wire | Square |
| 10-15A | 16AWG | 1.3mm² |
| 20A | 14AWG | 2mm² |
| 30A | 12AWG | 3.4mm² |
| 40A-60A | 10AWG | 5.3mm² |
| 80A | 8AWG | 8.3mm² |
| 100A | 7AWG | 12mm² |
| 120A-150A | 6AWG | 16mm² |
| 200A-250A | 6AWG*2 | 16mm²*2 |
| 400A | 2AWG*2 | 35mm²*2 |
BMS wiring directions
Application
400A Smart Uart Cable Battery Management System BMS
Inquiry Cart
0