Marine Boat Fender Eva Foam Filled Fender

Eva Foam Filled Fender Introduction

EVA foam filled fender is a floating compression bumper, which has a wide range of uses and is suitable for a wide range of applications. It is made of an external polyurethane protective layer, reinforced rubber nylon cord fabric, and an internal space, which is filled with foam as a collision-absorbing medium. The outer layer of the EVA foam filled fender has extremely low strength, so it has extremely high wear resistance. The EVA foam filled fender effectively absorbs the impact force, therefore reducing the resultant force acting on the dock/ship at the contact point.

EVA foam filled fenders consist of three parts, including outer polyurethane layer, reinforced nylon cord fabric, and internal polyethylene foam. The outer layer is strong enough to resist frictions and the inner closed cell can stop any water permeating into the fender body.

Eva Foam Filled Fender Features

1. Resistance to acid and alkali
2. Diameter from 500mm to 4500mm, length from 1000mm to 9000mm
3. No need for air inflation
4. Lightweight and portable

Eva Foam Filled Fender Structure

• Closed cell EVA foam

Closed cell polyethylene foam performs well in high durability and sturdiness even at extremely low temperatures.

• Reinforced rubber nylon cord fabric

Nylon and tire cord reinforcement is strong enough to protect the foam inside.

• High elastomer polyurea skin

Outer wear surface is the non-marking polyurethane, which is resistant to acid and alkali, besides it has higher load bearing capacity and impact resistance.

• Other Accessories:

Q235 hot galvanized flange, hot galvanized central shaft tube/chain

Eva Foam Filled Fender Application

1. STD, STS defense

2. Holding trash as floating security barrier

3. Offshore defense

4. Yacht ship side bow fender for ship protection

Eva Foam Filled Fender Specification

For further information free to contact us.

Qingdao Jerryborg Marine Machinery Co., Ltd is a leading international marine products manufacturer & distributor with 15+ years of rich experience in production of marine docking & mooring systems. Jerryborg Marine Machinery Co., Ltd, headquartered in Qingdao, China, is committed to marine fendering and floating products production, R&D and sales. The Jerryborg Marine is equipped with production facilities for high-quality rubber products, ship launching airbags and foam fenders, Yokohama type pneumatic rubber fender, navigation buoys, steel/EVA mooring buoy, distributing mooring ropes, steel wire ropes, marine hardware like anchor chains, anchors, etc.

The Jerryborg serves as a strategic partner of Marine Fender & Mooring Industry, providing excellent products as well as professional and technical expertise. While our true role is designer and manufacturer for marine docking & mooring systems with accessories. We value all customers as important parts of our team, supporting them like close partners. we are with them at each step of the project, from technical consulting, engineering customized fendering and mooring solutions to the manufacturing and installation of marine docking & mooring systems. Our rich experience has earned a good reputation as a dependable partner in the waterways markets, harbors, international ports, etc.

Regional Distributors

The Jerryborg headquarters in Qingdao has an experienced team handling projects and orders from North American region, Asian-Pacific region, European region and EMEIA. The regional distributors promote the local contact with customers. Our cooperation with regional distributors is based on mutual trust, loyalty, long and close working partnership. During our annual meeting all our distributors meet with the service teams to keep informed on industry developments and to catch up with our highly internal quality standards as the best counselors for our customers. Direct contact between all our employees and distributors plays a significant role in our company’s development.

Manufacturing Facilities

Providing safe & critical marine fender systems and mooring systems, the Jerryborg has a strong focus on manufacturing all major spare parts in-house, guaranteeing “higher than highest” quality and reliability at their own production machines. Our rubber fender manufacturing machines in Qingdao has an extensively proven track record of manufacturing high quality rubber fender products & mooring products.

All staff and partners who are involved in the production of marine products are well qualified, frequently trained and further educated to keep up with the latest developments in their specific job.rubber rolling mill, fender press test machine, rubber vulcanizer.

Jerryborg's Focus

It is the mission of what our products are meant to do——creating the value of protection and safety. We offer the full range of marine fender products and marine mooring buoy products, from simple rubber products to highly engineering systems, as well as spare parts and fixings. A strong focus lies on internal manufacturing to offer high-level fenders & buoys at reasonable prices.

our fender systems are designed with an eye for the big picture to make sure our products qualified for the task, while paying attention to every little detail. Engineering advantages means that our partners can be confident in expecting the best from us in all areas.