Matte Black Primer Surfacer 1.2 Thinner Car Repair Paint

Matte Black

Features: High blackness, fast dry, good adhesion to the top coat.

Mixing Ratio: Matte Black : Thinner = 1 : 1-1.2

Spraying: To spray 2-3 layers, and the flash off time between layers is 5-10 minutes.

SURFACE PREPARATION:

1. Surface Should Be Clean And Free Of Dust, Grease And Oil.

2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.

Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats

Apply Using a Spray

Gun Nozzle:

1.2-1.4mm (Gravity Spray Gun)

1.3-1.5mm (Suction Spray Gun)

-Spraying Pressure: 3-4 Bar.

-Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)

-Number Of Coats: 3 Coats Maximum.

1. Are you a factory or trade company?

A: We are a professional paint factory with 20 years'+ history. We produce the car paint mainly, and also the industrial paint, wood paint, plastic paint, etc. Except of the paint, we also can supply the car care accessories, like the undercoating, rubbing compound, spray gun, polishing pads, wool pads, abrasive paper, masking tape, filter, strainer, putty spatula, etc.

2. What is your car paint system?

A: We produce the acrylic car refinish paint, medium solid(MS) and high solid(HS)system.

3. What is the applicable range of your products?

A: car, truck, metal surface products, guardrail, billboard,etc.

4. Does your company can provide the samples to test? What is the minimum order quantity?

A: We can provide the samples for free. The minimum order quantity is 100cartons.

5. Does your company provide the after-sales service.

A: Yes, if there is a request, our engineers can visit the customers and provide the professional solution.

6. If I come to China, how can I find your factory and visit?

A: We warmly welcome your visit to our factory and company. Our driver can go to the airport or the appointed place to pick you up to our factory.