Chain Feeding System Chicken Breeding Equipment

Automatic Broiler Breeder Female Male Farming Equipment for Parent Poultry House

Automatic Breeder House:

Patented plastic scraper chain feeding system for female breeder

- Stable running,uniform feeding,can run 36 meters/minute,the feeding capacity of 0.7-1.5kg/m,feeding speed.

-Drive system adopts cycloid pin wheel reducer,work stable and reliable,uniform feeding ,impact noise is lower.

-Hopper and interface area is equipped with the cover plate,which can effectively prevent feed spillover.

-90 degrees of corner wheel and rail surface through special hardening processing,bearing adopts metal bearing without oil ,The working life is longer.

-Adopt wear-resisting rust yarding manger,at the same time equipped with 44 cm of caloric restriction of the width of the grid ,which can effectively separate the cock and the hen,also can be customized according to customer requirements of different specifications of caloric restriction of the width of the grid.Galvanized sheet egg box adopts international standard design.

Automatic Breeder Farming House Equpment:

Female Breeder Chain Feeding System:

Driving motor:

use cycloidal-pin wheel reduce device, more stable and reliable convey feed equality, reduce noice than toothed wheel.

Feed trough bracket and connection:

They are liftable. We can adjust their height according different breeding stages. Bracket surface use hot galvanized

process, anti-corrosion, more suitable for poultry house environment.

90 degree corner wheel:

The wheel is after special hardening process, alloy bearing don't need oiling, have good wear resistance and long service

life.

Feed trough:

made of wear-risistant and anti-rust material, have 44mm wide limited food grill, which can separate the hens and roosters

apart effectively, the limited food grill distance can also be customized.

Chain:

imported from South Africa, have strong feed delivery speed, can reach 36m/minute.

Hopper:

We have 260Kg main hopper and 100Kg vice hopper, they are made of high quality galvanized sheet, there is cover plate

between hopper and trough interface, which is easy to adjust the height of feed level and to prevent feed spill.

Females&males pan feeding system:

Driving motor:

(Taiwan motor with overload protection of IP55 grade)

Power: 0.75kw

Voltage: 380V/220V/customerized

Frequency:50hz, three phase/single-phase, AC current.

Vice hopper:

Bin Volume: 115L,200L

Material: Hot-dip galvanized sheet

Material Thickness: 1mm

Pan feeding system:

Conveying pipe: 4 pans/3m, 3 pans/3m

Diameter: 45mm

Feed Pipe Material: Hot-dip galvanized steel pipe(the zinc coating amount is more than 275g/m2).

Thickness: 1.2mm

Spring auger: imported from South Africa

Feeding ability: 400kg/h.

Feed sensor:

When feed sensor is installed inside the feed pan(coonect to open), driving motor starts work to convey feed,

when feeder sensor does not touch feed, and it stops conveying feed when feed sensor touches feed( for main feed

line and pan feed line use).

When feed sensor is installed at the bottom of feed bin(connect to close), the function is opossite to the above situation.

Female breeders feed pan:

The main characteristics of our female breeder feed pan:

1). 4pans/3m, feed pan distance :750mm;

2). Feed pan diameter: 360mm;

3). Material:pp---Polypropylene;

4). Feeding capacity: 12.5 birds/pan;

5). 16 grills width of 40-52mm divide into 11 files, suitable for all stages breeders (including day-old birds) feeding needs;

6). Feed hole height of 70mm,80mm,90mm three files. when feed hole width is 52mm, height is 80mm, chicks can in&out

freely;

7). Feed pan capaicty: 16 grades files, 200-630g/pan, which can meet different stages chickens eating demands;

8). Pull switch design, easy to switch each pan;

9). Bottom of the pan can be hanged, easy to take down, convenient to install and wash.

Automatic Breeder Nest System:

1. 1520(length)*1285(wideth)*1020 (height)mm size(with prevent perching line), 24 holes design, one nest hole size 380*250mm.

2. High quality 0.5mm Galvanized plate ,one set weight 47kg, zinc weight 275g/m2, reach international standards.

3. Use high-quality PVC pedal ,smooth and no thorns,better than wood.

4.The plastic trays made of modified material, strong and good toughness. Also can be galvanized sheet.

System Pictures:

Contact:

Jing Yang

Mob/whatsapp/wechat: 0086 18830728667

Email: Jing@xqdmachine.com

Web: www.xqdmachine.com

Established in 2007, located Cangzhou, Hebei, China, we Xingqida, have gained huge recognition in the industry as a prominent Manufacturer and Exporter of a superior quality of Poultry Nipple Drinking and Pan Feeding Equipment.

We satisfy all of these poultry equipment requirements in an ideal way – offering a wide range for broilers, layers, breeders, pullets, as well as ducks and geese. Our product range includes: Nipple drinkers, Drip cups, Pressure regulators, Cable winches, PVC pipes, Feeding pans and other poultry drinking and feeding related accessories.

The aim of Xingqida is to continuously upgrade the technique and equipments to help clients achieve the best productivity.