Electric control Fan clutch 7482212344 7421012868 For Renault Truck Engine

Electric control Fan clutch 7482212344 7421012868 For Renault Truck Engine

Engine Cooling System Automotive Parts Electric Fan Clutch 7482212344, NRF 49097 for RENAULT Trucks
Silicon oil fan clutch replaces 7482212344 for RENAULT TRUCKS cooling system Engine Parts ZIQUN brand
Top Quality European Trucks Cooling System Parts Electric Fan Clutch 7482212344

The shape of the temperature sensor is like the clockwork of a clock. When the temperature is high, the temperature sensor is deformed and expands in the tightening direction to deflect the valve pin by an angle to achieve the purpose of opening the oil outlet. If the temperature sensor is turned on and the working temperature is too high, adjust it lower (to relax the spring). The clockwork type temperature sensor has only one fixed point, you can pull it out, make a big clip with iron sheet, move it in a relaxed direction, and then perform the test until it reaches the standard requirement. The clip can be stuck on the original fixed position and the metal sheet of the temperature sensor. During the adjustment, the moving position of the metal piece of the temperature sensor is extremely small, and if it is too large, the valve piece cannot be placed in a proper position. If the adjustment cannot be achieved, the valve plate can be riveted again, that is, the relative position of the valve plate and the temperature sensor can be changed so that they can cover the oil hole when the temperature is low, and the oil outlet hole can be opened after thermal deformation.

Performance check: Put the front cover of the silicone oil fan clutch and the driven plate into hot water together (not too much water to prevent it from flowing into the oil storage cavity of the clutch), and measure the temperature of the water with a thermometer, observe the temperature sensor, Write down the temperature of the water when it works. If this temperature value does not meet the requirements, it indicates that the temperature sensor has poor performance.

Image description

Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German