High quality Fan clutch 7420923587 5010619459 For Renault Truck Engine

High quality Fan clutch 7420923587 5010619459 For Renault Truck Engine

Silicon oil fan clutch replaces 7420923587 5010619459 for RENAULT TRUCKS cooling system Engine Parts ZIQUN brand
Top Quality European Trucks Cooling System Parts Electric Fan Clutch 7420923587

The following two methods can be used to check whether the silicone oil fan clutch works normally:

1. After the bai car engine is cooled, check whether there is any residual silicone oil between the silicone oil fan clutch. If there is a large amount of residual silicone oil, it means that the silicone oil fan clutch is not working properly.

2. The thermal inspection method is to check the operating state and sound of the silicone oil fan clutch when the water temperature of the car is close to about 90 degrees Celsius after the engine is started. If the fan noise is obvious, it means that the silicone oil fan clutch is not working properly.

Precautions for daily use of silicone oil fan clutch:

1. The clutch must be cleaned before installation to remove anti-rust grease and debris.

2. The clutch can be installed coaxially or on separate shafts. The axial direction must be fixed. The driving part and the driven part are not allowed to have axial movement. When the shaft is installed, the driving part and the driven part are coaxial. The degree should not be greater than 0.1mm.

3. When the wet electromagnetic clutch is working, lubricating oil must be added between the friction plates

4. When installing the jaw type electromagnetic clutch, it is necessary to ensure that there is a certain gap between the end face teeth so that there is no tooth grinding phenomenon when idling, but it should not be greater than the δ value.

5. The electromagnetic clutch and brake are B-class insulation, and the normal temperature rise is 40℃. The working temperature during the limit thermal equilibrium is not allowed to exceed 100°C, otherwise the coil and friction parts are prone to damage.

Our services:

1. Sample order acceptable;
2. Short lead-time (10~30 days in general);
3. Quick response: We will reply you in 24 hours.
4. Considerate after sales service: track the products in all process.

A questionnaire will be made to hear your comments on our products and service.

Image description

Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German