

Add to Cart
Ingersoll Rand Separator 22219174 Screw Compressor Air Oil
Separator
Fault analysis and solution of screw air compressor oil separation
(oil and gas separator) running oil
If small pressure valve seal leak or small pressure valve opening
in advance (opening pressure for each manufacturer design is
different, usually range between 3.5 ~ 5.5 kg/cm2), then the
machine at the beginning of the run build YouQiGuan pressure time
will increase, at this point in a state of low pressure gas oil
mist concentration is high, through the oil content in fast speed,
oil load is aggravating, separation effect is reduced, cause a
large fuel consumption.
Solution: overhaul the small pressure valve, and replace it if
necessary.
At present, the general screw air compressor has high temperature
protection, and its usually jump temperature is about 110 ~ 120℃,
and some machines in the use of unqualified oil, when the exhaust
temperature is high, there will be different degrees of oil
consumption (based on this, the higher the temperature, the greater
the oil consumption)
Solution: find the cause of high temperature, solve the problem to
reduce the temperature, as far as possible to choose good quality
oil.
Some air compressor manufacturers, in the design of oil and gas
separation tank, the design of the primary separation system is
unreasonable, the primary separation effect is not ideal, so that
the oil mist concentration content before the oil is very high, the
oil load is too heavy, the processing capacity is insufficient, and
the oil consumption is too high.
Solution: Manufacturers improve the design to improve the effect of
primary separation.
The fuel quantity exceeds the normal oil level, and some oil is
taken away with the airflow, resulting in excessive fuel
consumption.
Solution: After shutdown, open the oil drain valve and discharge
the oil to the normal oil level when the pressure in the oil and
gas barrel is zero.
Air compressor Model | Separator | Air compressor Model | Separator |
M200-250 | 22219174 | XF/EP/HP/XP75-100 Ⅱ | 42841239 |
Small UP | 22388045 | XF/EP/HP/XP75-100 Ⅱ | 42841239 |
UP5-11/15/22 | 54749247 | XF/EP/HP/XP75-100 SE | 39894597 |
UP5-30/37 | 54749247 | XF/EP/HP/XP75-100 SE | 54601513 |
M22S | 54595442 | XF/EP/HP/XP 125-200 | 42841247 |
M37S | 54595442 | XF/EP/HP/XP 125-200 | 39799578 |
M45 | 22089551 | XF/EP/HP/XP 125-200 Ⅱ | 42841247 |
M55-75 | 54601513 | XF/EP/HP/XP 125-200 Ⅱ | 39739578 |
M55S-75S | 39894597 | 125S/150S/175S/200S | 39863865 |
M90-110/160 | 54509427 | M90/M110/M132/M160 | 99277998 |
M90-110/160 | 54509427 | M90/M110/M132/M160 | 54509427 |
M132-160 | 54509427 | VHP600/700 | 92062132 |
S100-Ⅱ | 42841239 | VHP600/700 | 92062132 |
OilSeparator 22219174
Features
1. Low pressure drop and energy saving
2. High quality filtration media
3. Low oil consumption
4. Reliable and stable
5. Compact design
6. Long life span