ATLAS COPCO Separator 2901056622 Screw Compressor Air Oil Separator

Screw air compressor oil block common cause failure

• Screw air compressor surrounding environment.

Screw air compressor with corrosive gas in the surrounding environment, such as there will be some occasions sulfide, days that water, cleaning with chemicals such as volatile in the air, the heat of the machine itself to accelerate the engine oil oxidation, once these gases into the screw air compressor system and oil with chemical reaction, to produce the carbon deposition and the greasy dirt, such as part of impurities into the oil circulation system is blocked by the oil filter, another part of the impurity with the mixture of oil and air to oil, when air through the oil content, these impurities were stranded on the oil filter, the filtering hole plugging, oil resistance, the oil content in a relatively short period of time needs to change in advance.

• The use of qualified air filter, oil filter, oil, one or more cases exist.

The air filter with poor filtration accuracy will make some dust particles in the air unable to be intercepted, and will directly enter the screw air compressor system. The oil filter and oil distribution load is too large, leading to blockage.Impurities, oil oxides, worn metal particles into the screw air compressor system due to the poor filtration accuracy of oil, part of the intercepted oil filter layer, the other part of the impurities have been in the machine until the rise to the oil, separated after staying in the oil filter layer, resulting in premature oil plugging;Oil with poor oxidation resistance is not suitable for use, even if the working time is short, it will produce carbon deposit and glue, and the oil will be blocked.

• There is leakage on the pipe between the air filter and the air inlet of the main engine.

The common causes of leakage are: air filter is not installed well;The contact area of the air filter assembly is uneven;The contact surface of the air filter and the assembly has dirt attached to it, resulting in leakage;The elastic contact pad on the air filter surface is misplaced;Air filter or air filter assembly rupture, etc.

• Too much water in the oil filter material makes the filter material swell and shrink the micro hole, which reduces the effective separation area of the oil, leads to the increase of oil resistance, and the oil is blocked in advance

Notes for air oil separator :

• The air oil separator can only be replaced, not cleaned;
• Do not connect the filter with a flange.
• The oil return pipe must be inserted into the bottom of the filter to avoid affecting the oil return.

Features

1. Low pressure drop and energy saving

2. High quality filtration media
3. Low oil consumption
4. Reliable and stable
5. Compact design
6. Long life span

OilSeparator 2901056622

Qingdao Futai, Air Compressor Filter Manufacturer in China.