Add to Cart
Introduction of 980nm red blood vessel laser machine
Exposure of capillaries and veins caused by red blood cells, as
well as thinning of the skin, also contribute. 980nm red blood cell
laser machine uses a wavelength of 980nm to remove blood vessels
and is effective on all causes of capillary exposure. During the
treatment, it also stimulates the regrowth of collagen in the skin,
increasing the thickness and density of the skin. As a result, the
blood vessels disappear and the elasticity of the skin increases.
The porphyrins within the blood vessels absorb the 980 nm laser,
causing the vessels to coagulate and then disappear; the laser does
not damage the skin at all.
Why use 980nm Diode laser machine to remove vessel
1.980nm laser is the best absorption spectrum for porphyrin
vascular cells. The vascular cells absorb the high-energy laser at
980nm wavelength, coagulate and finally dissipate.
2. Overcoming the problem of large area burns to the skin from
traditional laser treatment of erythema, the professionally
designed handpiece focuses the laser beam to a range of 0.2-0.5mm
in diameter, thus allowing the energy to reach the target tissue in
a more concentrated manner while avoiding burns to the surrounding
skin tissue.
3. The laser stimulates the growth of collagen in the dermis while
vascular treatment is being performed, increasing the thickness and
density of the epidermis so that small blood vessels are no longer
exposed, while the elasticity and resistance of the skin is
significantly enhanced.
4. A system based on the thermal action of the laser. Transdermal
irradiation (penetration of 1 to 2 mm in the tissue) causes
selective absorption of hemoglobin by the tissue (hemoglobin is the
main target of the laser).
How 980nm red blood vessel laser machine works
The 980nm diode laser system is based on the thermal effect of the
laser and is divided into 4 stages.
1. The laser is converted into heat
2. The heat is transferred to the vessel wall
3. Thermochemical action on the tissue components of the vessel
wall
4. The vessel wall is destroyed
Scope of treatment
* Spider veins removal
* Telangiectasia
* Rosacea removal
980nm red blood vessel laser machine advantages
Parameters
Laser type | Diode laser |
Wavelength | 980nm |
Laser Power | 30 Watts |
Work mode | Single Pulse, Pulse, CW |
Pulse frequency | 1-5Hz |
Spot size | 0.5/1.0/2.0/3.0mm |
Lifetime | >10,000 hours |
Laser conduct | Fiber conduct |
Pulse width | 1-200ms |
Indicator | Diode laser 3mW 635nm |
Cooling system | Intense wind cooling |
Body material | ABS |
LCD Screen | 8.4 inch true color touch screen |
Size | 65cm*48cm*38cm |
Voltage | AC 220V/110V 50/60HZ 5A/10A |