IC694MDL740 GE Fanuc PLC Output Module

General Electric New IC694MDL740 GE Fanuc PLC Output Module

IC694MDL740 Description

The 12/24 volt DC Positive Logic 0.5 Amp Output module, IC694MDL740, provides 16 output points in two groups of eight. Each group has a common power output terminal. The module has positive logic characteristics; it sources current to the loads from the user common or positive power bus. Output devices are connected between the negative power bus and the module terminals. The module’s output characteristics are compatible with a wide range of load devices, such as motor starters, solenoids, and indicators. Power to operate the field devices must be supplied by the user. Individual numbered LEDs show the ON/OFF status of each output point. There are no fuses on this module. The blue bands on the label show that MDL740 is a low-voltage module.This module can be installed in any I/O slot in an RX3i system.

Features

★Allen-Bradley (1746,1747,1756,1769,1794,2711P..)
★TRICONEX (3008,3664,3805E.3704E,3700A 4351B...)
★YOKOGAWA (CP345,CP451-10,AMM12C,AAI141-S00...)
★ABB (07KT98 WT98,07KT97 WT97,DSQC679,IMASI23,IMDSO14...)
★Ovation (1C31194G01,1C31197G01,5X00106G01,1C31125G02...)
★BENTLY NEVADA (3500/42M ,3500/22M,3500/95.3500/15...)
★HIMA (F3330,F3236,F6217,F7126,F8621A....)
★FOXBORO (FCP270,FBM203,FBM204,FBM217,FMB231...)
★GE (IC693,IC697,IC695,IS200,IS215,DS200...)
★BACHMANN (MPC240,CM202,DI232,MPC240,NT255,AIO288...)

Hot Sale