NBR PVC Pipe Rubber Sleeve

Product Introduction

Silicone Sleeve Bushing is also called silicon sleeve, silicone sheath, rubber sleeve, which is made of elastic silicone rubber ( MVQ ) materials by compress mold with horizontal stripe, working like bushing, bellows, damper or bumper, etc. Other rubber sleeve bushings are mainly made of EPDM, neoprene, NR, NBR, PTFE materials, etc, and some of them are molded with metal parts like bronze, steel, brass and so on.

Product Specifications

Silicone sleeve features:

1. Silica gel bushing is also an insulating lining with good insulating performance.

2. Good wear resistance, providing insulation for moving parts, such as shafts, bearings, rockers, etc.

3. Protect components from vibration and corrosion, and reduce noise and impact.

4. Common bushing includes axle bushing, suspension system bushing, bearing bushing, car bushing, etc.

Product Pictures

The tolerance accuracy of our silicone rubber compression molding parts can be up to +/-0.02 mm, good parting line control, small flash

Silicone Sleeve Bushings are good protective products because of materials' vibration resistance and sleeves surface stick designs pattern for plain bearing, pipe & tube, flanged bearing, which protect protec components from much friction and shock from and manchine can avoid the whole part replacement, having a longer life span.

Silicone Sleeves Bushings are good shock proof and breakage proof elastomer rubber sheath, serving as rubber damper or rubber bumper:

Silicone Sleeve Bushing can be made of 100% eco-friendly silicone, which is non-toxic, anti-abrasive, high temperature resistance, etc, mainly used for medical devices, suspension system, industry machine etc.

Custom Silicone Sleeves Bushings Requirements

Offer 2D, 3D design drawings or samples, and also tell us your sizes telorance demands.

Sleeves Materials Demands: Silicone (MVQ), Neoprene, NBR, EPDM etc, or tell us operating environments, functions etc. If silicone sleeves, please tell us if need use FDA grade silicone.

Rubber Sleeves Color Demands

Durometer Demands (Hardness Shore A)

Rubber Sleeves Surface Demands

Sleeves Parting Line Demands

Silicone Sleeves Flashing Demands etc.

Different Silicone Rubber Sleeves durometer demands, surface demands, parting lines demands or rubber flashing demands have different production difficulty and production cost. Epecially for mold- making technology demands, compression mold steel choice, mold maintain when mass production etc.

One-stop service:

1. We have a complete production line, including mold making, silicone rubber compression, LSR injection and assembly.

2. With advanced equipment and complete testing equipment, the factory has obtained ISO9001 international quality system certification.

3. Accurately control the sleeve and the size deviation of bushing to ensure that the tolerance of finished products is controlled within the scope required by the drawing.

4. If the parting line or flash is found to be too large during the processing, the molding process will be adjusted and improved in time to ensure that the design standards are met.

5. Overseas sales team will provide you with a full range of services, including customs clearance, shipping and delivery