Add to Cart
7.5KW / 10HP Intelligent High Efficiency Industrial Air Compressor 1.06m³ / min 1550*700*1580
Application
traditional aerodynamics: pneumatic tools, rock drills, pneumatic picks, pneumatic wrenches, pneumatic sandblasting
instrument control and automation devices, such as tool replacement
in machining center.
vehicle braking, doors and windows opening and closing
in the air-jet loom, compressed air is used to blow weft yarns
instead of shuttles
food and pharmaceutical industries, using compressed air to stir
slurry
Starting of Large Marine Diesel Engine
wind tunnel experiment, underground passage ventilation, metal
smelting
oil well fracturing
high pressure air blasting coal mining
weapon system, missile launch, torpedo launch
submarine ups and downs, shipwreck salvage, submarine oil
exploration, hovercraft
tire inflation
painting
Bottle blowing machine
air separation industry
industrial control power (driving cylinders, pneumatic components
producing high-pressure air for cooling and drying workpieces
Superior design with 42 types of technology patent, two stages compression, realize maximum energy saving and lowest noise level.
State-of-the-art screw element, original Germany DENAIR air end, advanced SAP profile design, superior Sweden SKF element bearings.
Adopts world-renowned components, such as Schneider electronics from France, Danfoss pressure sensor from Denmark, etc. contribute to guarantee the compressor longer
service life.
Stainless steel oil pipe and air pipe, high temperature resistant (400C=752F ) and low temperature resistant(-270C=518F ), high pressure resistant. Ultra-long life(80 years)
completely leak free and maintenance free.
Conform to CE,IS09001 and energy saving certification, etc.
Specification
Model
| kp7.5KW-0.8 |
(M³/Min/Mpa) | 1.06/0.8 |
Power Kw/ HP | 22KW/10HP |
Ambient Temperature ℃ | 2℃-45℃ |
Cooling Mode | Air Cooled |
Discharge Temp | ≤Ambient +15℃ |
Noise Level Db(A) | 70±2 |
Driven Mode | Direct Drive |
Power (V/Ph/Hz) | 380V/3/50Hz |
Starting Mode | VFS |
Dimension (mm) | 1550*700*1580 |
Net Weight (kg) | 370 |
Out let Diameter (inch) | RP1 |
⊙ Schematics
1. Air Filter | 9. Oil Temperature Control Valve |
2. Air-in Easing Value | 10. Oil Filter |
3. Principal Screw Machine | 11. One-way Shut-off Valve |
4. Oil Air Separator | 12. Pressure Gage |
5. Oil Air Separating Filter Core | 13. Safety Valve |
6. Minimum Pressure Valve | 14. Vent Valve |
7. Radiator with Aluminum Alloy Fans | 15. Compressed Air Dry Separator |
8. Return Check Valve | 16. Motor |
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the
support of the ball bearings and roller bearings as a result. The
damage and the cost are lowered and the service life is extended.
Some force is counteracted by the axial force generated by the
bevel gear. So the load on the bearings of the master machine is
lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can
integrate the electromotor with flange, shaft coupling box-gear
box. and the master machine into one in such way the master machine
and the electrometer are aligned forever in the transpiration. The
SRC series compressors equipped with effective and fully sealed
air-cooling electromotor.