Embossed 0.03mm 30um High Density Polyethylene Film
Brand Name:UPASS
Certification:ISO9001
Minimum Order Quantity:Negotiable
Delivery Time:Negotiable
Payment Terms:TT/LC
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
No. 799, Middle Jiasong Road, Qingpu District, Shanghai, China.
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Embossed Silicone Coated HDPE Release Film
Description:
HDPE release liner refers to the film with separative film on the surface.
HDPE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to different organic pressure glue. According to different release film , the release force is different, the viscidity of release product glue is different , to adjust the release force, to make it have the light and stable release force during peeling. There are thermal curing and UV curing for silicone coating due to different release force requirements.
The type of embossing:
Type 1:
Type 2:
Why Embossed Release Film:
1.Easy peel off when remove the release film.
2.High residual adhesiveness rate(≥70%) to prevent the influence of
silicon transfer on products.
3.Environmental Production technology of solvent and solvent-free
products.
4.Environmentally Friendly. Can be recycling.
Parameter:
| Products Name | HDPE film | Spec. | 0.1mm*920mm | ||
| Detection Methed | Q/TPXP 1-2013 | Date | 2020.7.2 | ||
| NO. | Item | Factory Requirement | Detection Value | Detection | |
| 1 | Appearance | No bubbles, no stains, no damage, no impurities | Qualified | Qualified | |
| 2 | Spec. | Width | 920±10mm | 922 | Qualified |
| Thickness | 0.1±0.005mm | 0.102 | Qualified | ||
| 3 | Max.F (N/50mm) | TD (CD) | ≥150 | 204 | Qualified |
| MD | ≥150 | 212 | Qualified | ||
| 4 | Elongation (%) | TD (CD) | ≥200 | 1155 | Qualified |
| MD | ≥200 | 968 | Qualified | ||
| 5 | Tensile Strength | TD (CD) | ≥18 | 21 | Qualified |
| MD | ≥22 | 25 | Qualified | ||
FAQ:
Embossed 0.03mm 30um High Density Polyethylene Film
Inquiry Cart
0