Digital Display Vertical Pressure Steam Sterilizer Autoclave Automatic

Digital Display Automatic Vertical Pressure Steam Sterilizer/ Autoclave

1.Sterilization Work Process Description
1.1 Preparation
1)Open the lid of the container, take out the drums and add water manually till it reach the high level. (Use distilled water)
2) Turn on the power and turn on the power break switch.
3) Standby indicator light is on. The high water level indicator lights up.
4) After piling the items, place them on a sieve plate sequentially, and leave some appropriate gaps between the packages. We suggest to make the packages into 20cm x 20cm x 10cm. The dressing and the textile should not be tightly packed. And don’t forget to place the sterilizing indicator.
5) After placing the drum in the container, close the and clockwisely tighten the hand wheel till the lid is closed. Don’t close too tight as which might bring damage to the rubber gasket.
6) Set sterilization parameters (see parameter settings for details).

The Sterilizing time can be set by the followed table 2, please set the sterilizing time and temperature according to different item required.

CHARACTERISTICS

• Equipped with a pressure/temperature controller, the pressure setting range is 0.07 to 0.22MPa

(corresponding to a saturated steam temperature of 115 to 134°C).

• Equipped with a timer to automatically control the sterilization time.
• Equipped with a safety valve, the relief valve would automatically releases the pressure when the

sterilization pressure exceeds the maximum allowable value.

• The immersed type electric heating tube, which is with anti-dry function. When the water level is

lower than the specified water level line, the sterilizer automatically cuts off the heating power and alarms at the same time.

Parameters

Guangdong kunling purification equipment Co.,Ltd, which also called Gcc. It's a high-tech enterprise is manufacture air purification equipments for clean room, such as air shower, pass box, clean bench, fan filter unit(FFU),fume hood and so on. And it also is one of the leaders with more than ten years clean room project solutions experience.

Our product concern the follow range:

1: Clean room equipment: air shower, pass box, weighing booth, laminar flow clean bench, biological safety cabinet, fume hood, fan filter unit(FFU), air filter outlet, laminar flow ceiling, fresh air cabinet, Laminar flow wardrobe and so on.

2: HVAC air filter: ULPA air filter, Mini-pleats HEPA filter, HEPA filter with clapboard filter, high

temperature-resistance filter, pocket air filter, V-cell air filter, pre-filter, active carbon air filter,

v-bank air filter with big air volume, bag air filter, panel air filter, z-line air filter and Grease filter.

3: Hard wall clean room project, such as design, construct and monitor service and raw material supply.

Our product service for biological, food, chemical, medicine, electronic, micro-electronics,

skin care, precise instrument industry and Aero-Space, laboratory, scientific, national defense area

and so on , Our product have good reputation in worldwide ,our client spread all over European

and Southeast Asia.

4. Industrial water treatment equipment

We have excellent technical team pursue the high quality to exist, insisted concept of credit for in sustainable development

We sincerely hope establish steady and friendly business relationship with you.