

Add to Cart
Our Syngas Analyzers PTM600-T is high-stability infrared detector for the simultaneous measurement of CO, CO2, CH4 and C2H2, CnHm. These gases are suitable for challenging applications such as syngas and gasification atmospheres. In addition, analyzers may use a compensated thermal conductivity cell for H2. Electrochemical O2 sensors may also measure percent levels of oxygen in the sample gas stream.
Suitable for continuous industrial syngas analysis and gasification analysis.
Technology | CO/CH4/C2H2: High resolution NDIR H2: TCD O2: ECD |
Range | O2: 0-25%VOL CO: 0-10%VOL H2: 0-100%VOL CH4: 0-10%VOL C2H2: 0-10000ppm (Note: measurement range can be customized.) |
Resolution | CH4, H2, CO, O2: 0.01%, C2H2: 1ppm |
Precision | CO2, CH4: <2%FS H2S, O2, CO, H2: <3%FS |
Responding time | 15s (infrared) |
Repeatability | 0.5% |
Inlet gas flow | 0.7-1.2 L/min |
Inlet gas pressure | 2kPa-50kPa |
Sampling gas condition | no dust, no water, no tar |
Response time(T90) | <10s (NDIR) |
Display | High-resolution colored 7-inch |
Communication interace | RS485/RS-232, 4-20mA |
Power supply | 100-240VAC |
Work temperature | -10—40°C, -40 -70°C customized |
Relative humidity | <95% non condensing |