

Add to Cart
HDPE Pe Plastic Automatic Butt Fusion Welding Machine 500-800mm
Packaging & Delivery
Port:Tianjin Port
Lead Time:
Quantity(Units) | 1 - 10 | >10 |
Est. Time(days) | 5 | To be negotiated |
Automatic Butt Welding Equipment Introduction:
The MM-TECH V-CNC series automatic hydraulic butt welding machines
are applied to joint PE, PP, PPR and PVDF pipes and moulded fittings.
Selection of components with a long service life ensures a low
maintenance and repair, friendly and reliable operation.
Automatic Butt Welding Equipment Specification:
Welding Range | 500mm-800mm |
Reducing Inserts | 500mm-560mm-630mm-710mm-800mm |
Ranges of Application | PE,PP and PVDF |
Working Voltage | 400V±10%,50/60Hz |
Total Power | 17.60KW |
Heating Plate | 13.2KW |
Planning Tool | 2.2KW |
Hydraulic Unit Motor | 2.2KW |
Environment Temperature | -10°~45° |
Automatic Butt Welding Equipment Features:
1.The CNC hydraulic control box is available for all MM-TECH basic
model machines, covering the size from O.D 50mm through O.D 1200mm.
2.Fully encased control box makes the protection level up to IP 54.
3.Due to the unique powertrain, it could not only create sufficient
hydraulic power during welding procedure, but also it makes sure the precise control.
4.And most importantly, it greatly reduce the weight of control
box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
5.All connections sockets are located at the back of hydraulic
control unit, including sockets for trimmer tool and heating plate. 6.No additional power distributor
is needed.
7.Various welding standards (DVS, ISO, WIS, etc.) could be
pre-installed by different languages upon your request.
8.All welding reports could be saved immediately to internal memory
with a capacity of 2000 reports after welding accomplished, or print the report.
9.Meanwhile, it is available for downloading through the USB
interface.
10.All MM-TECH V-CNC series hydraulic control box is featured with
PLC touch screen, extremely user-friendly RFID access technology.
11.Troubleshooting and program upgrade are available for remote
control.
12.When heating plate hook up with machine chassis, inserting or
release the heater will be controlled remotely by hydraulic unit,which is same as trimmer.
13.These characteristics prevent the operators from being injured.
SWT-V800A incluye:
* Cuerpo de maquina con 4 pinzas y 1 consola automatica con
conector rapido;
* Una placa calefactora recubierta de teflon con sistema de control
de temperatura separado;
* Dispositivo de autodesmontaje: ayuda a quitar la placa de
calentamiento despues del proceso de remojo;
* Una fresa electrica;
* Mangueras hidraulicas con acoplamientos rapidos;
* Soporte para fresa y placa calefactora.
Servicio postventa:
Siempre ofrecemos productos de alta calidad y precios viables para
todos los clientes y nos hemos ganado la confianza, disfrutamos de
una buena reputacion en el mercado.
Garantia de calidad de la maquina: 24 meses .-- Si alguna pieza se
rompe o no funciona en condiciones normales de funcionamiento, ¡se
la proporcionamos gratis!