Product Details
Gold Trommel /Gold Trommel Wash Plant / Portable Mini Gold Trommel
Wash Plant/Mining Equipment
1.Feature
1).Portable placer mining plant 's widely used for portable gold
rush plant
2).Easy to move,because of the small volume.
3).Feeding by manual.
4). High capacity and high power scrubbing, large capacity can
reach 200-220tons per hour
5). The long drum of the scrubber retains material for longer, more
vigorous washing for complete separation
6). One high output electrical motor driving a gear system
providing efficient torque
7). Adjustable rotary speed
8). The water with high pressure flushed the inwall of drum
9). Can accept material up to 230mm
10). Mechanical sealing of inlet chute - minimal spillage when over
feeding
11). Drive loads absorbed within the drive frame and pivoting drive
frame design - Foundations only have to support vertical load and
are not critical for alignment ie minimal cost
12). Shell design less mass than conventional roller supported
units - installation craneage requirement reduced
2.Applications
1). we design it to washing alluvial gold gravel, clay and sand,
2).it normaly use in Gold Trommel plant , placer gold concentrate
plant, alluvial gold washing plant, river gold mining plant
30.It can input feeding size up to 230mm. processing capacity upto
200tons per hour
4). popular used in South Africa, Sudan, Ghana, South Amercia
alluvial mining plant
3.Basic ParametersNo. | Item | | | |
| 1 | Parameter | KDTJ-50 | KDTJ-100 | KDTJ-200 |
| | Dimension(mm) | 6500*2500x2900 | 9300x2400x4200 | 10000x3200x4200 |
| | Trommel Screen Size | 1200*3000mm | 1500x4000mm | 2000x5500mmmm |
| | Working Capacity(t/h) | 50-100t/h | 150-200t/h | 200-300t/h |
| | Max. particle of material | 150mm | 150mm | 150mm |
| | Gold Mining Way | Vibrating Chute and Gold Chute | Vibrating Chute and Gold Chute | Vibrating Chute and Gold Chute |
| 2 | Trommel Screen | | | |
| | Trommel+scrubber size | 1200x3000mm | 1500x4000mm | 2000x5000mm |
| | Scrubber Length | 1000mm | 2000mm | 2000mm |
| | Working form | Chain wheel driving | Chain wheel driving | Chain wheel driving |
| 3 | Feeder Hopper | | | |
| | Size | 3200x2200x1600mm | 3600*3000*1800mm | 4000*3200*1800mm |
| 4 | Gold Chute | | | |
| | Size | 1000x4000mm | 1000*6000mm | 1000*6000mm |
| | Quantity | 1 | 2 | 3 |
| | Gold carpet | Mitsubishi,Japan | Mitsubishi,Japan | Mitsubishi,Japan |
| 5 | Vibrating Chute | 1set | 2 sets | 3sets |
| 6 | Water system | | | |
4.Working Principle
A: The rotary Gold Trommel plant is an autogenously rotating drum
scrubber, utilising pebbles and rocks within the feed source to
fracture and disintegrate clays, agglomerates and soft oxides.
B: Disintegrated material is homogeneously slurried within the
drum, whilst the autogenous load is retained within the drum by
reverse flights located at the drum discharge end.
C: Slurry and washed oversize overflows the drum discharge throat
to the concentric exit trommels.
D. this Gold Trommel plant is widely used in placer gold mining
plant with sticky clay raw ore .5.Main PartsThe trommel screen mainly consist of motor,reducer,drum
units,racks,ring of clamp,black block gine,discharge hole,
feed port,polyproplyene board, screen body etc.inclination of drum
equipment ,motor is connected by reducer&the
drum unit,the drive drum rotate around its axis.6.Company information1)We attach the development of scientific research, and form
strategic partnership with the major research institutions.
2)We had established good cooperation with Import and export
trading company, established
Shandong magnetic equipment Research Instituting.
3)We have CAD Aided Design R & D center and physical mineral
processing laboratory,
can work out reasonable and practical solution according to
customer's technical requirements
and work site.7.FAQIn order to provide you with efficient & suitable quotation and
assistance for you,
could you kindly tell me the following information:1)Working capacity(t/h)
2)What is th clay content(%)?
3)Is there any big stone in the ore? What is the maximum size?
If you have any quuestion about our company or products, please
feel free to contact with me, and i will try my best to make you
satisfied.
Company Profile
Qingzhou KEDA Environment Protection Machinery Co., Ltd. is a
company specialized in producing dredgers, aquatic weed harvesters,
gold mining machines and greenhouses. Head Dredging aims to meet
the needs of our customers by providing competitive and
high-quality services, such as dredging technology, water cleaning,
mineral separation, etc.This product have many series, such as
aquatic weed harvester, trash skimmer/hunter, transportation boat
and other water surfaceproducts.Our company take integrity as the
foundation of the development and stand firmly in the market by
accurate market positioning aswell as excellent after-sales
service. Our products are successfully exported to Indonesia,
Malaysia, India, South Africa,Ethiopia, Vietnam, Mongolia, etc.