Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor
Brand Name:Ariza
Certification:EN 14604 / EN 50291
Model Number:CS01
Minimum Order Quantity:500pcs
Delivery Time:7-15days
Payment Terms:T/T, Western Union, MoneyGram,Paypal
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Chongqing China
Address:
The 2nd floor of B1 building,Xinfu industry zone,Chongqing Rd.,Heping village,Fuyong Town,Bao'an district,Shenzhen,China 518103
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor
Faulty warning.
Low battery warning.
Hush function.
Manual Test / Auto-Reset.
Big test button for easy operation.
Low-power consumption design ,3years or 10 years can be custmized.
Dustproof, mothproof and anti-white light interference design.
Automatic calibration, guaranteeing accurate sensitivity.
Tuya WIFI APP control.
Specification
| Product name | Tuya Wifi Smart Carbon Monoxide And Smoke Alarm |
Audible alarm | Φ82*50.5mm |
| Dimension | Up to 40m² |
Hush Time | Approx. 10minutes |
Temperature | -10℃~+50℃,(≤95%RH non-condensing) |
Humidity | ≤95%RH non-condense |
| Battery | 1.5V AA Alkaline battery |
| Operation Current | ≤10uA |
| Alarm Sensitivity | 0.1~0.2dB/m |
| Silence Time | Approx. 10 minutes |
Installation Instructions
1. At first you should install an alarm in the bedroom and
walkway.Ifthere are several bedrooms in the house,please install an
alarm inevery bedroom .
2. Install an alarm above the stairway and on every floor of the house.
2. Install an alarm above the stairway and on every floor of the house.
3. Smoke,heat and burning things will spread horizontally after
rising tothe ceiling,so install the alarm in middle of the ceiling.
4. If the alarm can not be installed in the middle of the ceiling,install itkeeping 300mm away from the corners.
5. If the alarm is installed in the wall it should keep 100mm away fromthe ceiling.
6. If the length of the room or the hall is beyond 30foot,you need toinstall several alarms there.
7. When the wall or ceiling is slanting,the alarm needs to be installedminimum 500mm away from the highest wall or ceiling point in theroom.
4. If the alarm can not be installed in the middle of the ceiling,install itkeeping 300mm away from the corners.
5. If the alarm is installed in the wall it should keep 100mm away fromthe ceiling.
6. If the length of the room or the hall is beyond 30foot,you need toinstall several alarms there.
7. When the wall or ceiling is slanting,the alarm needs to be installedminimum 500mm away from the highest wall or ceiling point in theroom.
Silence Mode
During the unit is alarming,youcanpush the test button,it will be paused the unit alarming for approx 10minutes.The red LED will flash once every 8 seconds,it indicates the smoke alarm device is running into the silence mode. The silence feature is to be used only when a known alarm condition,such as smoke from cooking activates the alarm.The smoke alarm devicewill automatically reset after approximately 10minutes,if after this period,particles of combustion are still present,the alarm will sound again.
CAUTION
Before using the alarm silence (silence),identify the source of the smoke and be certain a safe condition exists .
Maintenance and Cleaning
There are a few simple steps you need do to keep it working properly.
1. Test the alarm once a week.
2. Clean the alarm surface with a soft brush or cloth every month.
3. Do not paint the alarm. Paint will seal the vents and interfere with the sensor’s ability to detect smoke.
4. Never attempt to disassemble the alarm to clean inside.This will In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and debris.Clean the alarm at least once a month to remove dust, dirt, or debris. Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm device. If there is a defective battery or other failures, you can refer to “Trouble shooting” for solution, if there are still failures during warranty, you can return to your retailer.
Replaced Battery
1. The low battery signal can last for maximum 30 days, please replace the batteries in time to keep it working properly.
2. Battery required: standard 1.5V AA batteries.
3. Acceptable brand: Duracell MN1500, Golden Peak LR6, GP GN15A, etc.
4. Correctly install the positive and negative poles of the battery (“+” & “-”)
5. Waste batteries should not be placed into any household waste or recycling bin as all of them have the potential to spark. Check with your Local Authority for recycling advice.
FAQ
Q: How can i place an order?
Please provide the details of your requirements as clear as
possible. So we can send you the offer at the first time.
A: For designing or further discussion, it is better to contact us
with Skype / email / phone, in case of any delays.
Q: How about the quality of the personal alarm ?
A:We produce every product with good quality materials and fully test three times before shippment. What is more, our quality
areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q:What is your terms of delivery?
A: We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the
one which is the most convenient or cost effective for you.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor
Inquiry Cart
0