Product Details
Description
Rail gauge rod, also named gauge tie rod or gauge tie bar, is a
member bar which is specially designed to joint two steel rails at
the rail bottom to protect the rails from tilting and keep the
rails in certain rail gauge. Not all sections of the railway track
are needed to install the rail gauge rods. Only in the special
sections whose curve radius are less than a certain value or in the
station yards or in other special areas we need to install the
gauge rod. The general design will be usually given the specific
requirements according to The Design Requirements of Railway Track
and The Code for Quality Acceptance Standard of Railway Engineering
Construction.
Types of rail gauge rods
As a professional manufacturer of rail gauge tie rod, GNEE Rail can
supply standard gauge rods for 56-½" track and rails of 60-140 lbs,
for both non-insulated and insulated type, with approved
certificate of ISO9001:2008 and CRCC authorization. Besides, we
produce various kinds of gauge tie rods, such as AREMA 1-1/4
"insulated gauge tie rod, and other gauge rod used in UIC, BS
rails, with length of 600mm, 762mm, 900mm, 1435mm, etc.
Standard Gauge Rod
A standard gauge rod with two ends includes components of 1pcs rod,
4pcs iron card, 4pcs flat washer, 4pcs nuts, 4pcs spring washer, no
matter for non-insulated, or insulated types.
| No. | Part | Quantity | Specification | Material |
| 1 | rod | 1 | M30 M36 | 3# |
| 2 | iron card | 4 | I type II type | KTH350-10 |
| 3 | plain washer | 4 | M30 M36 | 3# |
| 4 | nut | 4 | M30 M36 | 3# |
| 5 | spring washer | 4 | M30 M36 | 65Mn |
Application: 43,50,60,75kg/m rail
Operating temperature: -40~60 degrees Celsius
Standard: TB/T1780-86
Non-standard gauge tie rod
It is to be produced by customizing depending on customers’
drawings and specific requirements.
We make gage rods in single end and double end styles with both
offered in insulated and non-insulated versions. Our insulated gage
rods are made with GPO-3 fiberglass based insulation for the best
electrical resistance and minimum water absorption. We also
manufacture 3/4" and 1" gauge rods for your smaller rail sizes and
special track gages.
Company Profile
Gnee Steel Co.,Ltd (GNEE) is the affiliated company for ANGANG
GROUP who are one large state-owned iron and steel group located in
Henan, China.
GNEE are specialized in manufacturing and supplying large
quantities Seamless steel pipes and Shipping-building plates, We
are provide high quality steel of Steels and Coils, plates, tool
steels,steel pipes and other steel products with guaranteed Grade-A
quality, excellent performance and competitive prices.
All of steel products from GNEE have been exported to overseas
distributors, warehouses, and factories in USA, Mid-east, Europe,
Bangladesh, Sri Lanka, Egypt, Saudi Arabia, and other countries and
regions. Therefore, GNEE has got a great market share in the
international market.
GNEE have a professional technician team, which not only have
decades working experience in steel industry, but also have a deep
and clear insight of the technology condition and the manufacturing
state in the Chinese main steel mills.
With the high efficient supervision system and professional
experience, we offer our efficient and considerate service to
clients around the world. We hope sincerely to become your Chinese
supplier and partner.
Our company will remain honest and pragmatic as always to
safeguard, strengthen and carry forward our National Brand, provide
quality commodities and top-class services to domestic and overseas
clients. We sincerely wish to develop long-term win-win cooperation
with domestic and overseas clients.
