

Add to Cart
2.5 Inch SS Type Wireline Pulling Tool For Fishing
I. Overview:
The SS-type fishing tool is an external fishing tool. Its structure
principle is similar to the JD type fishing tool, the outer fishing
neck is grasped by a special claw, and it can be shaken down to
release it. According to the different grip distance, it can be
divided into SB and SS.
II. The main technical parameters of the tool:
Size | Actual outer diameter | Fishing neck | Connection | Grab diameter |
1.5" | 1.43" | 1.187" | 15/16UN | 1.187" |
2" | 1.77" | 1.375" | 15/16UN | 1.375" |
2.5" | 2.18" | 1.75" | 15/16UN | 1.75" |
3" | 2.74" | 2.313" | 15/16UN | 2.313" |
According to customer's requirements, we can also provide products with required specifications and parameters.
III. salvage operation steps:
1. Connect the fishing tool to the basic tool string and go down
the well;
2. When quickly descending to the predetermined position, slowly
lower the tool string;
3. Wait for the tool to grab the outer salvage neck and shake
upwards;
4. When the upward shock cannot be lifted out, the downward shock
can be used to release.
IV. Disposal after the tool is released:
After pulling out the tool, insert the jam-releasing tool or
screwdriver into the jam-releasing place, pry open the fishing
claw, open the fishing claw, and then release the tool.
V.Matters needing attention:
Before running the tool, check that there is no looseness in the
thread of the tool connection.
Welcome to contact us at any time.