API Q1 Approved Side wall Cutter Wireline Fishing Tool
Brand Name:Ruixin
Certification:API Q1
Model Number:1.5inch~2.5inch
Minimum Order Quantity:1
Delivery Time:2-3 weeks
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Baoji Shaanxi China
Address:
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Supplier`s last login times:
within 30 hours
Product Details
Company Profile
Product Details
API Q1 Approved Sidewall Cutter Wireline Fishing Tool
Wireline Fishing Tool Wireline Snipper
I. Overview:
Wall cutter, also known as the side wall cutter, is used to cut the
steel wire on the inner wall of the tubing. When the wire can not be salvaging, it can be
used to cut the wire by the limitation and support of the inner wall of the tubing, to
reduce the difficulty of subsequent wire salvage.
II.Common specifications and technical parameters:
Specifications | OD | FN. | OD. of blade after opening |
| 2-3/8＂ | 1.78＂ | 1.375＂ | 2＂ |
| 2-7/8＂ | 2.08＂ | 1.375＂ | 2.44＂ |
| 3-1/2＂ | 2.72＂ | 1.75＂ | 2.99＂ |
| 4-1/2＂ | 3.43＂ | 2.313＂ | 3.937＂ |
III.Use method
1. Connect the wall cutter under the SB or F-type running tool to
run the well; (tubular jar is required in the tool string)
2. When down to the depth of the rope socket, use the jar to shake
down;
3. After the shock is completed, the tool can be lifted up;
4. If you encounter obstacles while lifting the tool up, it can be
shaken out of hand down (when connected to the lower part of the SB tool) or up (when
connected to the F-type ( running tool) Shock release
IV.Matters needing attention:
1. The edge of the cutter is sharp, so please So pay attention to the operation.
2. Before operation, check whether the cutter can be opened freely without obstruction.
Welcome to contact us at any time.
API Q1 Approved Side wall Cutter Wireline Fishing Tool
Inquiry Cart
0