Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
Brand Name:Ruixin
Certification:API Q1
Model Number:2inch 2.5inch 3inch 3.5inch
Minimum Order Quantity:1
Delivery Time:2-4weeks
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Baoji Shaanxi China
Address:
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Supplier`s last login times:
within 30 hours
Product Details
Company Profile
Product Details
Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
GR Pulling Tool Wireline Pulling Tool
Ⅰ. Introduction
GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling tool (without shear pin), which can be released by upward shear. It is usually used for fishing lock mandrel, packers ,and bridge plugs with internal fish necks.
Ⅱ. Technical parameters of common specifications
Szie | Actual OD | FN | Fishing OD | Connection | Lower connection thread |
2″ | 1.81″ | 1.375″ | 1.38″ | 15/16″-10UN | 1/2-13UN″ |
2.5″ | 2.25″ | 1.375″ | 1.81″ | 15/16″-10UN | 5/8-11UN″ |
3″ | 2.72″ | 1.75″ | 2.31″ | 1-1/16″-10UN | 5/8-11UN″ |
3.5″ | 3.11″ | 2.313″ | 2.62″ | 1-1/16″-10UN | 5/8-11UN″ |
Technical parameters can also be according to user requirements
III. Maintenance
1. After the tool is disassembled, check the damage of each component and replace the damaged parts.
2. When assembling, apply a thin layer of grease on the thread surface.
3. After assembly, the fishing neck is attached with thread protector and marked for later use.
Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
Inquiry Cart
0