Quick Union Wireline Lubricator Hydraulic Pressure Control
Brand Name:Ruixin
Certification:API
Model Number:2inch ID 3inch ID 4.06inch ID 5-1/8inch ID
Minimum Order Quantity:1
Delivery Time:4-8weeks
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Baoji Shaanxi China
Address:
Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Supplier`s last login times:
within 30 hours
Product Details
Company Profile
Product Details
Quick Union Wireline Lubricator Hydraulic Pressure Control
I. Introduction
Wireline Lubricator Wireline Pressure Control is a tube which with
quick union and can stand high pressure, it’s used to accommodate
wireline toolstring. Wireline Lubricator Wireline Pressure Control
bottom end is connected with blow our preventor, upper end is
connected with hydraulic stuffing box and grease injection system.
Usually lubricator length is 8ft, sometimes also available 4ft and
7ft, it’s decided by the downhole tools length when operation.
There are two types: Upper and lower lubricator.Upper lubricator is
basic toolstring such as rope socket, stem, jar, etc;
Lower lubricator is for accommodate downhole devices, it’s with
bleed off port. Install the pressure jointon it and then install
the pressure release valve to read the well pressure and release
it.
II. General Technical Parameters
OTIS Quick Union
Bore | Work Pressure | Service | Connection | Seal Dia. |
2.5＂ | 5K 10K | Std H2S | 5＂-4ACME | 3.5＂ |
3＂ | 5K | H2S | 5＂-4ACME | 3.5＂ |
3＂ | 10K | Std | 5＂-4ACME | 3.5＂ |
3＂ | 10K | Std H2S | 5-3/4＂-4ACME | 4＂ |
2.5＂ | 15K | H2S | 5-3/4＂-4ACME | 4＂ |
4＂ | 5K 10K | Std | 6-1/2＂-4ACME | 4.75＂ |
3＂ | 15K | Std H2S | 7-1/2＂-4ACME | 5.5＂ |
5＂ | 5K | Std H2S | 8-1/4＂-4ACME | 6.188＂ |
4＂ | 10K | Std H2S | 8-3/8＂-4ACME | 5.25＂ |
5＂ | 5K 10K | Std H2S | 9＂-4ACME | 6.75＂ |
4＂ | 15K | Std H2S | 9-1/2＂-4ACME | 6.25＂ |
6.38＂ | 10K | Std H2S | 11-1/2＂-4ACME | 8.25＂ |
BOWEN Quick Union
Bore | Work Pressure | Service | Connection | Seal Dia. |
2.5＂ | 5K 10K | Std H2S | 4-3/4＂-4ACME | 3.75＂ |
3＂ | 5K 10K | Std | 4-3/4＂-4ACME | 3.75＂ |
3＂ | 5K | H2S | 4-3/4＂-4ACME | 3.75＂ |
3＂ | 5K | Std H2S | 5-1/2＂-4ACME×2 | 4.375＂ |
3＂ | 10K | Std | 5-1/2＂-4ACME×2 | 4.375＂ |
2.5＂ | 15K | Std H2S | 6-5/16＂-4ACME | 4.375＂ |
3＂ | 10K | Std H2S | 6-5/16＂-4ACME | 4.375＂ |
3＂ | 15K | Std H2S | 7＂-5STUB ACME | 4.375＂ |
4＂ | 5K | H2S | 7＂-5STUB ACME | 4.375＂ |
4＂ | 10K | H2S | 8-1/4＂-4ACME×2 | 6.0＂ |
III. Pressure Test
The lubricator should be tested for compressive strength periodically, the test pressure is 1.5 times of the working pressure.
1. Install the test sub and test pipeline.
2. Open the test pump for the pressure test and press the pressure to test, holding 15 minutes and fill the test record card.
IV. Maintenance
1. Replace the seals after each time usage.
2. Install with the thread protector when in storage.
Quick Union Wireline Lubricator Hydraulic Pressure Control
Inquiry Cart
0