1Mhz high temperature ultrasonic water flow sensor steel flowmeter gland sensor
Brand Name:TaiMI
Certification:ROHS/REACH
Model Number:TM-1MHZ Flowmeter gland sensor
Minimum Order Quantity:Negotiable
Delivery Time:2 weeks
Payment Terms:Western Union, MoneyGram, T/T ,PAYPAL
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
A04 10 B Blocks of Shenzhen Bay Science and Technology Eco-Park SHENZHEN,Guandong,CHINA 518052
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
1Mhz high temperature ultrasonic water flow sensor steel flowmeter gland sensor
ith the rapid development of Internet of things technology, the
demand for high-performance ultrasonic sensor of ultrasonic
intelligent water meter applied in intelligent buildings is
becoming more and more obvious. In order to further improve the
measurement performance of ultrasonic intelligent water meter,
TAIMI has launched a new generation of water meter flow sensor from the perception layer. Compared with similar competitive
products on the market, this product has more stable electrical
performance and stronger pressure resistance. At the same time, it
has the characteristics of high sensitivity, fast reaching the peak
value and easier signal processing, which helps to improve the
measurement accuracy of ultrasonic water meter, and provides a more
competitive hardware basis for the iterative upgrade of ultrasonic
intelligent water meter.All copper material, high temperature resistance 130 degrees.
Appearance and shape
1 .Appearance: The mark is clear, without stain or damage.
2. Comply with ROHS directive and national environmental laws and
regulations.
3. Dimensions (Unit: mm)
Sealing method: The sealing ring is located at the bottom of the
transducer launching surface
| TM-Flowmeter gland sensor-1MHZ | |||||
| Part NO. | TM-YG14-1MHZ | resonant frequency | 975±30KHZ | static capacitance | 550pf±15% |
| Resonant Impedance | ＜1500Ω | Waterproof | IP68 | operating temperature | 5～130℃ |
| withstand voltage | ＜3Mpa | Transmitting beam Angle | 5°-10° | receive sensitivity | ≥120mv(half-wave) |
| shell material | All stainless steel | Emission surface diameter | φ16.2mm | installation dimension | Φ16.5mm |
| sealing method | Epoxy resin potting | lead wire location | Sensor center | Cable type | coaxial line |
Test Method
1. Test Conditions
The test should be conducted at the temperature of (25±3) ℃ and the
relative humidity of 40% ~ 70% R.H. In the environment.
2. Test Method
| 项目 | test method |
| center frequency(Fr) | Measurement of thickness vibration mode by Agilent5100E impedance analyzer |
| Resonant Impedance(R0) | |
| electrostatic capacity(CP) | LCR meter,1KHz/1V |
Precautions
.1 The ceramic body of the sensor chip is mainly composed of lead
zirconate titanate ceramics. Please ensure that the ceramic body
complies with local environmental regulations when discarded.
.2 The performance parameters mentioned in the specification refer
to isolated components. Please fully estimate the influence of
other factors when used in the whole circuit.
.3 Sensor conductor, red is positive electrode, black is negative
electrode. Needle insertion: long for the positive pole, short for
the negative pole.
.4 If you have any question about this specification, please
contact and negotiate.
PS:We also supply ultrasonic water meter DN15,DN20,DN25MM Copper
pipe and plastic pipe.
Please connect us for get more details:
Email:sales88@taimihk.com
Phone/WhatsApp:+86 13538467125
FAQ
Q:Why choose us?
A:high accuracy high efficiency high quality
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Do you provide samples ?
A: Yes, we could provide sample in 3 days
Q: What is your terms of payment ?
A: we can negotiate through email.
1Mhz high temperature ultrasonic water flow sensor steel flowmeter gland sensor
Inquiry Cart
0