White Silicone Caulk SMG533 BSI Solar Panel Adhesive 400ml 25kg

1. Product Features

• This product adopts advanced sealant product technology and high-purity imported base material. The special technology can effectively eliminate residual unsaturated and low-boiling liquids.
• It has the characteristics of environmental protection, low odor and no corrosion; environmentally friendly
• It is simple to use, and has good bonding performance with various metal materials, tempered glass, composite materials, and PPO materials;
• Moderate hardness, low water vapor transmission rate; good water resistance
• Pass the double 85 high temperature and high humidity test, anti-aging test, and hot tensile test. It has the properties of anti-yellow stain, moisture-proof, corrosion-resistant, mechanical shock, thermal shock, and shockproof. Will not soften, crack or degrade under high temperature conditions.
• Have a complete test report and certificate, pass SGS, UL, TUV, BSI certification; pass QC080000 hazardous substance process management system certification

2．Main Purpose

• This product is used as adhesion and sealant for solaode module outline border and junction box;
• Solar panel frame
• Solar panel junction box is bonded and sealed

3．Typical Technical Data

4．Packing

• Plastic bottle packing, net volume is 310ml;
• Sausage Packing, net volume is 400ml;
• 5 gallons drum packing, net weight is 25kg;
• 55 gallons drum packing, net weight is 235kg.

5．Pretreatment procedure of adhesive surface

• All the surfaces must keep clean and dry, clean out the grease and contamination that have bad effect on adhesive surface. The solvent applicable include propel alcohol, or methyl ethyl ketone.
• Adhesion with some certain kind of plastics need to use special surface treatment. For example, adhesion with polypropylene and polytetrafluoroethylene need chemical corrosion or plasma-treatment, therefore it can reach optimal adhesion.

6．Instructions

• Apply SMG533 neutral sealant on the pretreated surface, cover the another cover instantly.
• When exposed to moisture at room temperature and 50% relative moisture, the surface of sealant would cure in crust in 10 to 15 minutes. Before curing the residual sealant should be swept out by knife tool ( use blade will sweep out the cure skin easily).

7．Curing Time

After formation of crust, curing process will penetrate into inside sequentially. In 24 hours time (at room temperature and 50% relative moisture), curing thickness of SMG533 neutral sealant is 4.1mm. The deep-seated part, especially the part that has limit contact with air has longer curing time. Similarly curing time would extend in low-temperature condition. We advise the users wait patiently (enough time) to avoid affecting the integrity of the sealant. This time is depended by many factors, it should decided by users (decide through special application of the sealant).

8．Service life and storage

When SMG533 neutral sealant is original biding , kept in shade and dry at the temperature below 27℃, useful life of neutral sealant is 9 months (since product time).

As the result of SMG533 neutral sealant would react with moisture of the air(form curing skin),the sealant must be tightly sealed in containers when not used. Blockage can form in sealant tube or tube end in storage time, it can be clean out easily ,residual component of the sealant won’t change.

9. Precautions

This product is innocuous after curing, but avoid contacting with eyes and children before curing; The work area must keep ventilation state.

Attention:The information published in this article is all that we believe to be reliable. Due to the wide variety of situations, we cannot understand all the situations, so we cannot guarantee the correctness and applicability of our products in certain usages and uses. Users should understand the product in detail before using the product, and then decide the best way to use it.