JP200 Brushless DC Motor Water Pump 100L/Min For Hybrid Bus Motor Control Cooling
Brand Name:junqi
Certification:IS9001, TS16949,CE
Model Number:JP200-2Pin-24V
Minimum Order Quantity:1 set
Delivery Time:base on order,
Payment Terms:T/T, Western Union, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu China
Address:
No.28 Shunyuan Rd, Changzhou City, JIangsu, China
Supplier`s last login times:
within 3 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Junqi JP200 Brushless DC Motor water pump high flow 100L/min for Pure Electric Bus and Hybrid Bus Motor control cooling
Technical Parameters Table:
| No. | Technical Parameters | |
1 | Medium Liquid | 50% Glycol aqueous solution(Preferred choose Organic Type,grain size≯0.35,ppm≯0.1g/L) |
2 | working temperature | -40℃~85℃ |
3 | Normal Medium Temperature | 10℃~90℃ |
4 | Storage Temperature | -50℃~90℃ |
5 | Extreme | -40℃~105℃ |
6 | Flow Rate | 6000L/H |
7 | Head | 5.5m |
8 | Rated Voltage | DC24V |
9 | Voltage Range | DC18~32V |
10 | Power | 180W±10W |
11 | Customer choice | PWM/ Fauilt feedback/CAN Function |
12 | Protection Level | IP68 |
13 | Weight | ≤1.5kg(without Bracket) |
14 | Noise | ≤58dB(A) |
15 | Service Life | ＞20000h |
16 | OD of inlet/outlet | φ38 |
17 | Lead wire Type | Integrated with pump body or lead wires with connectors |
18 | Protection Function | Over Current Protection, Over/Low Voltage Protection, Over Temperature Protection, Locked-Rotor Protection,Dry-Running Protection, Reverse Polarity Protection. |
2. Mechanical installation
2.1 The pump can be installed vertically or horizontally mounted
(see figure 1 ) When installed
vertically, the outlet port should be upward .
2.2 In order to avoid the dry- running (air get stuck in
impeller),the water pump outlet port should
be vertical or in the upper of the impeller. (see figure 1 )
2.3 The connected pipe should be vertically mounted (or no elbow in
20cm )to make the air
discharged easily, the outlet pipe should not be used less than 90
degrees elbow (see figure 2).
2.4 Can't use the seawater or other heavy pollution with big grain
impurity liquid as the liquid
medium .
Performance Curve:
Attentions:
1. Please add a fuse in the water pump power supply circuit to cut
off the power supply when appearance the failure.
2. Avoid the water pump is covered or blocked and affected by the
surrounding devices heating. The installation space is convenient
for maintenance and replacement operation.
3. Working ambient temperature:-40℃--120℃, should try to avoid
close to three-element catalytic, gas discharge pipe system and
engine during the installation, ensure the working environment
temperature
4. The installation position of the water pump should as much as
possible close to the low water level , to extend the service life
of the pump.
5. Pay attention to the purity of the water, avoid to jam and
impeller-blocked to reduce the service life of pump
6.Please use the pump far from the dusty environment, the dust is
harmful to reduce the service life
Mechanical Dimensions:
Applications:
1.The engine cooling circulation Pump
2.Motor control cooling cycle of 12m pure electric bus and hybrid
bus
3. The New enery automotive cooling cycle
4. Heating vertilation air conditioning
5. Automotive engine cooling circulation
6.Truck motor control cooling cycle.
JP200 Brushless DC Motor Water Pump 100L/Min For Hybrid Bus Motor Control Cooling
Inquiry Cart
0