JYQD_V7.3B Voltage 7~48V Max Current 10A Drive Power Less than 200W Hall Sensors BLDC Motor

JYQD_V7.3B Voltage 7~48V Max Current 10A Drive Power Less than 200W Hall Sensors BLDC Motor

Description:

Application Notes:

1. Confirm that the voltage and power parameters of the motor cannot exceed the range specified by the driver board.

2. This Driver Board suitable for 120-degree Hall brushless DC motors. Not all manufacturers’ line sequences correspond to the line sequences of the drive board. Customers can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation. Achieve the best driving effect .

3. JYQD_V7.3B drive board is bare board, drive power below 100W motor does not need to force heat dissipation, need to ensure normal ventilation.

4. The 5V output port on the driver board is prohibited from connecting to external electrical equipment. It is only suitable for connecting external potentiometers and switches to this board for speed regulation and reversal.

5. The Signal on the JYQD_V7.3B driver board is the motor speed pulse output signal, and the output current is less than 5mA.

WiringConnection Diagram:

Ports Descriptions:

1. HALL Sensor Port
GND — Hall negative pole
Hc — Hall Hc
Hb — Hall Hb
Ha — Hall Ha
5V — Hall positive pole

2. Control Port
GND — Used for Driver board internal control
VR — Speed control port. Analog voltage speed regulation 0V-5V speed regulation,linear speed regulation from low to high. PWM speed regulation needs to be grounded with the driver board.
Z/F — Rotating direction control ports. Analog voltage speed regulation 0V-5V speed regulation, linear speed regulation from low to high. PWM speed regulation needs to be grounded with the driver board.
Signal — Motor speed pulse signal output port, 5V pulse signal
EL — Enable port control. Connect 5V to allow operation, connect GND to forbid operation.
5V — Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation.

3. Power port
P+ — DC +
P- — DC -
MC — Motor Phase C
MB — Motor Phase B
MA — Motor Phase A

4. Please pay attention to the motor phase wire and Hall wire not to be too long. It will cause signal interference If the wire is too long.

5.The port spacing of the control port and power port are 2.0mm and 3.96mm respectively.

6.Pay attention to the insulation of the drive board when adding heat sinks or placing them.

Dimensions(mm):

Changzhou Junqi Mechanical Electronics Co.,Ltd is a professional Exporter relies on five parnter physical factories.

The main products: Auto Parts( Power window switch,Auto electric water pumps, Auto lock, Door handle, Wipper motor and window regulator motor), Stepping motor and driver, Brushless DC motor and driver, DC Gear Motor, PM Step motor, Brushless dc blower and Special power supply ( Deuterium lamp and power supply)

80% of our products are produced by our Production-oriented partner factories,our products are stable and reliable performance with powerful technical support, so we can offer comprehensive product solutions to our clients with competitive development ability.we are specialized and experienced inindustrial electrical products,we have our own superb core technology and mature product line,even we have our own OEM controlling microchip. as most of Junqi products are directly come from the manufacturers (our partner factories),our products are more competitive pricing,more powerful developing ability,faster response and professional service.

Our partner factories can provide talented individuals with access to advanced technology and cutting-edge equipment, ensuring the yield of high-quality products. the partner factories have successfully passed the quality management system certification for the ISO9001, IATF16949 and ISO14001 etc. These are to ensure that all the goods received by our customers pass the inspection.