High Speed Cold Rolled U Stud Machine Manufactured Metal Profile Roll Forming Machine

High Speed Cold Rolled U Stud Machine Manufactured Metal Profile Roll Forming Machine

U-shaped stud machine uses strip steel as raw material to produce complex cross-section profiles through continuous cold rolling (products include: light steel keel, paint keel, cassette keel, various building profiles, steel structures, steel-lined door frame profiles, High-speed retaining wall) blocking, etc.) and different specifications of cold bending, baking machine equipment, using PLC control.

Features of U-shaped stud machine:

1. Mill rolling capacity: width ≤150mm, plate thickness 0.6-2.0mm

2. Production speed: 6-13 m/min

3. Total installed capacity: about 5.5kw

4. Production output: 15 meters long X 2.5 meters wide

1. The equipment is controlled by PLC, and double safety protection is set during normal production.

2. The bed is welded steel plate. And it is tempered to eliminate internal stress and avoid hollow deformation.

3. The forming frame is a cast iron structure and has been tempered. High strength, replace long.

4. The material of the roller shaft is 40Cr, and the hardness is HB280 after quenching and tempering.

5. The material of the forming mold is GCr15, quenched, and hardness: HRC56-62°C.

6. The transmission structure is gear box transmission. Each forming frame has a light steel keel machine. It can ensure that the equipment runs over time, high intensity, and long in length.

U-shaped stud machine processing technology: unwinding----straightening----rolling forming----cutting----receiving

U-shaped stud machine equipment consists of: unwinding machine, guide frame, forming host, correction device, cut-to-length part, receiving table, electrical control part, etc.

The main parameters of U Stud Machine:

Liming Stamping Form Machine Co., Ltd. was established in 1995. After 27 years of unremitting efforts, it has been developed from the state-owned old factory with 8 employees to the current group with 360 employees and the overall solution provider for industrial chain customers with various roll forming machines.

Currently, Liming has 4 production plants and one Headquarters R&D and Design Center. The four factories have a total area of 55,000 square meters. Liming has developed from a single roll forming machine manufacturer into the "National Building Material Equipment R&D Center", "Steel House Design and Installation Company", "Metal Cold Bent Profile Entrusted Processing Company", and has become the overall solution provider for the metal construction industry, metal decoration industry, solar photovoltaic industry, rolling door industry, metal fence post, agriculture planting industry ... with 36 kinds of cold-formed metal profiles and products.

Our designers are world-class, and go to the first-class machinery factories in Finland, Germany and France to learn the advanced manufacturing technology and services from European factories every year, so as to improve ourselves and help customers to obtain European machinery and service with minimal project investment.

It's as simple as you provide only one picture, we are capable of making a complete set of 3D drawings, profile use scenarios, workshop site planning and VR composition of roll forming machine. You can 100% realize the mechanical drawings and configurations before ordering.

It solves the problems of cheat by those companies that deceive you with low prices and low quality, and avoids different goods ordered and delivered. You should get the clear mechanical display for your equipment when purchasing.

Please believe us due to our development history with constant efforts, reject the low-quality competitive small factories and trade companies that change industries at any time with our technology and strength. Please give us a chance to show you every aspect of our group.