Curved Aluminum Arm Church Auditorium Chairs / Red Auditorium Seats ISO approved

Curved Alumiun Arm Fixed Folding Auditorium Chairs With Table

Feature of Folding Auditorium Chairs

The back of the seat is made of special fabric, which can be flame-retardant, stain-resistant, non-spontaneous, non-fading and safe.

Backrest and seat cushion are made of stereotyped sponge, steel spraying fixed feet, built-in flip-type triamine writing board, solid wood armrest surface, seat/back board, hemp/velvet fabric finish, spring return mechanism

Chair seat structure: It adopts a reinforced connection structure, a reinforced horizontal tube is installed between the two back corners, and a shock-proof rubber pad is installed at the rear of the seat bag, so that the stress point is no longer sponge when the seat collides with the back under external force. It is more durable, firmer and more comfortable.

The side plate is made of plastic ABC by injection molding, and it will never be deformed. The surface is pasted with imported hemp, which is beautiful and neat.

Writing board: It can be set as front type and back type. The front type writing board panel is made of ABS composite material and formed by injection molding at one time. The shaft adopts a special fixing device, and the support palm connecting piece is aluminum alloy injection molding. The rear writing board, the panel is a fireproof board, and the bracket is made of 3 mm thick cold-rolled steel stamped with folding function.

The seat row spacing should meet the following requirements:

A. Short row method: Hard chairs should not be less than 0.80m, soft chairs should not be less than 0.90m, the stepped ground row spacing should be appropriately increased, and the horizontal distance from the back of the chair to the most prominent part of the back row should not be less than 0.30m;

B. Long row method: Hard chairs should not be less than 1.00m; soft chairs should not be less than 1.10m. The stepped ground row spacing should be appropriately increased, and the horizontal distance from the back of the chair to the most protruding part of the rear row should not be less than 0.50m;

C. When setting up seats against the back wall, the distance between the last row of seats on the floor and pool seats should be increased by at least 0.12m.

The number of seats in each row should meet the following requirements:

A. Short row method: When there are aisles on both sides, it should not exceed 22 seats, and when there are aisles on one side, it should not exceed 11 seats; when the limit is exceeded, the row spacing will increase by 25mm for each additional seat;

B. Long row method: There should be no more than 50 seats when there are walkways on both sides, and no more than 25 seats when there are walkways on one side.

The auditorium should reserve wheelchair seats for the disabled. The seats should be 1.10m deep and 0.80m wide. The location should be convenient for the disabled to enter and evacuate, and the internationally accepted signs should be set up.

The slope of the slope is not more than 1:6.

Ramp seats cannot be arranged in an arc.

There are horizontal walkways, and the rear row should not exceed 10 rows.

The vertical and horizontal walkways should not be less than 1.2 meters.

FAQ

1.Can you do OEM?

Yes, we do OEM according to clients’ requirements.

2.What’s your lead time?

It’s according to the quanity. Usually 25-30 days based on MOQ quantity.

3.Can you provide samples?

Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.

4.What’s your delivery port?

From Chongqing, Shanghai, Guangzhou or Shenzhen

5.What’s your payment terms?

TT transfer is preferred.

6.Do you have color choice?

Yes, we have multi colors for the clients.

Aireach Seating locates in the city of Chongqing, Which is the biggest city in China, and our factory is founded in Chengdu city in 1989.We specialize in manufacturering telescopic bleachers, outdoor bleachers,multi type of stadium chairs, auditorium chair, school chairs.

We mainly supply high-quality products to South East Asia, Middle East, Europe,American countries and some African countries. Supplying the best seating all over the world is our only pursuit.

We have several enggineers who have more than 20 years experience in this industry.They're the very beginning explorer who learn the experience from Japan.They are experienced and creativity for producing,designing wide range of retractable bleachers, stadium chairs and auditorium chairs.